• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

who can help me? ? ? ?

  • Thread starter Thread starter raffaele89
  • Start date Start date

raffaele89

Guest
Bye-bye.

I'll play a video where I have to do more or less what you see in the video.... or up to 4 minutes
to consider that the object I have to imprint is a pipe......https://www.youtube.com/watch?v=8gz6w1dcz6eI have inventor 2016
or if you have other methods to do this....

Thank you very much
:confused:
 
thank you so much for the interest....the video that you attached to me I had seen, but working with tubes that have more complex shapes I find a little difficult... .
Let's see if anyone can help....
 
are not indicated quotas and one can not know how big this tube will be. In any case, the fact that you want to print it makes me think it is not necessary measures. I speak a little ignorant because I'm not sure what I'm saying, but honestly I don't think you can print a tube, how do you keep the hole inside? If you make a casting you wouldn't have a way to make both an internal and an external diameter. for my experience I know that the pipes are bent with folds. I hope I've been helpful.
 
TECNOMODEL said:
a tube so you get it with a fold, not from mold.
Click to expand...
I'm sorry, maybe I've explained very badly, without perhaps,
the tube is folded with a curvetubi I asked how to make a dime that I need for control after bending a tube imagined to have a serpentine with so many folds it remains difficult to take some measures, so I would draw a block that has the footprint of the tube, so once folded I put in, so I control the pz.
 
If you make a block with the footprint of the pipe you discard them all in the process phase.
with the fold you have tolerances and differences between one piece and the other, if the blade is too precise does not pass control even a piece.
Usually you do a tool that goes to control the odds that need some precision.
to do so, they use appropriately placed thorns and with the right game, in length they use "banders" with a shouldering of two different sizes, one does the "pass" and one the "not passes".
all must be thought and built having well present the piece with its tolerances and the function that must fulfill.
 
I know and you're right, but I need to do what I've explained for a piece. How can I do that? ? ?
 
make a multibody part, draw the block in which to draw the footprint, amounts the solid of the tube, positions and with the combined command you will subtract the tube to the block.
 
TECNOMODEL said:
make a multibody part, draw the block in which to draw the footprint, amounts the solid of the tube, positions and with the combined command you will subtract the tube to the block.
Click to expand...
so far ok....

you put that tube to be imprinted at various heights and I can't take a reference plan....it is here that I stuck, I don't know if I explained:confused:
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 41 (members: 0, guests: 41)
Back
Top