who knows where i can turn?

[stefanobruno]

I designed some testing stations where we use ceramic blades.
They used to build them in germany, now they've blown us up.
I asked some companies in Italy, idem or manco answer.
the objects are these:
Does anyone have any indication of who could do that?
are ceramic without particular characteristics, the required accuracy is decimal.

Thank you.

 

[volaff]

is it mandatory that they be made of ceramics?
Thought you'd do it in 3d printing?

 

[rinato]

Hello, I, years ago, had a contact for work with the "scleros" of bone nipple,
which cost elements in hm; perhaps I can help you, given the affinity of materials and reasonable proximity.
Good research.

 

[stefanobruno]

is it mandatory that they be made of ceramics?
Thought you'd do it in 3d printing?

We only do 3d printing to prove they're in place before they're contracted.
it is necessary that they are ceramics for question of insulation and wear, these do not work much, but they are still 2/300000 insertions.

 

[stefanobruno]

view the affinity of materials

I see they are metal oriented, I need ceramics for insulation issues.
I can make a call anyway.

Thank you.

 

[PIETRO2002]

I see they are metal oriented, I need ceramics for insulation issues.
I can make a call anyway.

Thank you.

try to see some industry making accessories for the textile industry! type brake wheels etc. I don't know if it's still open. .

 

[rinato]

Right, I didn't consider the possibility of electrical insulation.
then it could go well, academically, even glass,
or tufnol cited in this discussion

Usura Piano di scorrimento

Buonasera, per un progetto in corso occorre un materiale resistente ad usura ed a basso attrito,oltre ad avere l'esigenza di un materiale che resista bene a compressione e taglio,vorrei evitare tecnopolimeri perché abbiamo già avuto problemi in passato e frequenti sostituzioni (quindi...

www.cad3d.it

.

 

[Stefano_GS]

with ceramics we also mean material like the hm (hard metal but in reality is a ceramic being tungsten carbide typically tied with cobalt)?
In that case there are some sinterings, among which I can advise you ceratizit, which deal in addition to catalog material also of drawing details. the cost will not be contained

 

[stefanobruno]

the cost will not be contained

We're aware of that, but your ears turn backwards.

 

[TorMec]

How about ceramic peek?

 

[stefanobruno]

How about ceramic peek?

I was just about to talk to another client of mine, do you know anything about it?
My other client uses it in metal supports.I looked if I could turn my details into that verse, but I gave up, I have no room to anchor myself.
I read some material features but I can't figure out if you can paste.

 

[TorMec]

Yes in my previous experience I have had the opportunity to use it many times.the ceramic peek designated as tecapeek cmf has all the characteristics to be a quality material with good mechanical strength, wear resistance, excellent electrical and thermal from -200° to +200°.it is very used in testing machines for electronic industries and mechanical processing that can be done with centesimal precision are really small, it lends itself well for micromechanical. the best known manufacturer is located in germany and is called esinger (https://www.ensingerplastics.com/it...semilavorati/peek-ceramica-tecapeek-cmf-white) but you can also find an Italian channel, torino you can hear the uciesse (https://www.uciesse.it/mobile.php?idpag=1) or insulating castles of mapping, while for the construction I recommend tlm of volpiano (https://www.tlmpack.com/tlm-company/) who have already worked these materials and are very good especially in micromechanics.

 

[stefanobruno]

I have been able to use it many times.

What to say, in two days you already gave me two " vital" indications.
Today I feel with my client and I think it will take away (we will take away) a nice weight from the stomach.

 

[brn]

Yes in my previous experience I have had the opportunity to use it many times.the ceramic peek designated as tecapeek cmf has all the characteristics to be a quality material with good mechanical strength, wear resistance, excellent electrical and thermal from -200° to +200°.it is very used in testing machines for electronic industries and mechanical processing that can be done with centesimal precision are really small, it lends itself well for micromechanical. the best known manufacturer is located in germany and is called esinger (https://www.ensingerplastics.com/it...semilavorati/peek-ceramica-tecapeek-cmf-white) but you can also find an Italian channel, torino you can hear the uciesse (https://www.uciesse.it/mobile.php?idpag=1) or insulating castles of mapping, while for the construction I recommend tlm of volpiano (https://www.tlmpack.com/tlm-company/) who have already worked these materials and are very good especially in micromechanics.

ensinger is based in Italy near legnano. excellent products.
the peek loaded ceramics I do not know by spraying the site I see that it has the same expansion coeff. of the unloaded peek. is there so much difference in the practical act between the two materials?

 

[TorMec]

esinger is present all over the world and of course also in Italy but the main seat is in germany. Unless you have to make warehouse and resell the material you buy in large quantities I doubt that for a small brush or tondino or even only sample test can obtain it from the main seat or from the sites displaced in Italy also because it has a high cost, for which it is preferable to turn to those who sell it

 

[brn]

esinger is present all over the world and of course also in Italy but the main seat is in germany. Unless you have to make warehouse and resell the material you buy in large quantities I doubt that for a small brush or tondino or even only sample test can obtain it from the main seat or from the sites displaced in Italy also because it has a high cost, for which it is preferable to turn to those who sell it

I usually buy from them, never had quantitative problems (of course 20 mm of pom do not provide them but one meter si), even the samples always gave them to me.

only one note: the natural peek is very "heel" as material if it falls risks that breaks, loaded with ceramics fear is worse.

 

[TorMec]

What to say, in two days you already gave me two " vital" indications.
Today I feel with my client and I think it is
I usually buy from them, never had quantitative problems (of course 20 mm of pom do not provide them but one meter si), even the samples always gave them to me.

only one note: the natural peek is very "heel" as material if it falls risks that breaks, loaded with ceramics fear is worse.

I was referring to that, if you need a 200x200 tablet often 5mm you can't buy the plate by one meter and pay it gold to use 20 cm.cert is more fragile but it's not a material that needs to be used for high stress there goes the specific application and in the world of testing is frequently used.

 

[welcome to the machine]

I use ensinger products for over 20 years (their pom c is exceptional: I make cams with cam follower... crawling!) and have a deposit a few miles from where I work. The manager is a former employee of mine, and if you want, I see if they have any "sweet" of peek if you have to do some evidence. It costs dear and if you fall out of order.. .not bounce, but thermal and electrical insulation are excellent.

 

[stefanobruno]

with the peek we don't come anywhere, they can't make objects, and I can also understand it.
now we are going along the aluminum road with hard anodization, see where it takes us.
the Germans of the ceramics have planted a tyson-type barrel, we are on our knees and the referee has already arrived at number 8.

 

[brn]

how can on do objects?
ceramic is notoriously expensive.. .
Was aluminum not to be excluded for isolation issues?