winner

[fiorot.daniele]

excuse the banal question but as always you get lost in a glass of water... I press that I have always worked with sw for years I am encapsulated in a problem I can not bind 2 sketches or better... Is the question possible?I'd like the center of the circle to kill with the bow but it doesn't allow me... I did some evidence and I can't tie a sketch with another...
you can help me

 

[TECNOMODEL]

you have to project a geometry of the first sketch and bind yourself to the projection.

 

[fiorot.daniele]

Okay then in this case I should project a point...
cmq I allow myself a personal reflection on the sketch dress sw 10 to 0 for example another function that is missing is length path or at least I can not find it. .

cmq thank you very much for the answer

 

[TECNOMODEL]

I agree on the evaluation compared to sw, even when I went to inventor I found it a little bit more Moroccan in all areas.
then you get used to it.... .

 

[marcof]

you have to project a geometry of the first sketch and bind yourself to the projection.

Let's go. are still at the level of the horrid sketcher that I tried ten years ago in which the geometry is not hooked out of the sketch plane but it is necessary first to project it on?

 

[fiorot.daniele]

But there's something wrong with me....
in creating a part of normal the first sketch that I generate the bond always at the origin but with inventor if I try to win anything at the origin does not allow me. . .
I have also searched in the guide but do not refer to all this
boys seem to have returned to the beginning the problem is that I am drowning on a spit of water

 

[fiorot.daniele]

But there's something wrong with me....
in creating a part of normal the first sketch that I generate the bond always at the origin but with inventor if I try to win anything at the origin does not allow me. . .
I have also searched in the guide but do not refer to all this
boys seem to have returned to the beginning the problem is that I am drowning on a spit of water

I have to project the origin at the beginning of the sketch............ .
Of course that the lady autodesk could strive to copy something from others

 

[Catafratto]

it is possible to automatically have the projection of the point of origin in the sketch going in:
tools > application options > sketch
and popping automatic projection of the origin of the part

 

[fiorot.daniele]

it is possible to automatically have the projection of the point of origin in the sketch going in:
tools > application options > sketch
and popping automatic projection of the origin of the part

Thank you very much for this: