worked piece simulation.

[iron72]

Good evening.
I should practically compel, by didactic nature, a sheet cutting and bending mold to get a cap, like that for beer bottles but also without cracks. practically a cap like this: |_| i.e. on straight walls, be maybe putting even a small corner of deformity.
my question is possible once all the details, put together, given the due constraints of movement simulate the production of the piece?
i.e. practically put a plate or a tin disk and see what happens after it has been printed?
Thank you.
p.s.: if it is not possible with this cad there is the possibility with someone else?

 

[meccanicamg]

hi iron72,
I believe that with inv and even swx you can see dynamically deformation as both first calculate dynamics until impact and then use the deformation module in the desired instant (impact). only that the phenomenon evolves even after that moment continuing deformation.

I don't know which program is capable of such a simulation. if you only care about a visual thing you can do everything and more knowing at least minimally the behavior of the sheet that turns into a cap. If you try to determine the phenomenon with finite element analysis I see it quite hard.

maybe and I say maybe with swx with the impact module could be possible to do something but also with static. I have modeled a punch and a matrix to put a gommotto on the arm of the auto semi-axis and the local deformation of the rubber I saw it with swx... But I remember it was a trauma.

 

[iron72]

Sorry what is swx? And what would he do?
be what interests me and see it visually and then if it is possible to measure it with some instrument of inventor even after deformation.
i.e. what I want to calculate and see can also not be done dynamically, i.e. insert the plate, 1st time and after I have the cap, 2nd time
I mean, I don't want to analyze forces or anything to get my printed piece.
Thank you.

 

[meccanicamg]

Sorry what is swx? And what would he do?
be what interests me and see it visually and then if it is possible to measure it with some instrument of inventor even after deformation.
i.e. what I want to calculate and see can also not be done dynamically, i.e. insert the plate, 1st time and after I have the cap, 2nd time
I mean, I don't want to analyze forces or anything to get my printed piece.
Thank you.

swx=solidworks version any

in the linear static module or in the nonlinear static module you can definitely apply a force, get a deformation and save the deformed colrpo. possibly do this step several times using the previously deformed bodies. the problem is to define the body / contact zone/imbutitura.
you should look if you have inventor 2011 professional in the finite element analysis module if you have the ability to save the deformed body.

if you simply want to do an animation, with inventor you can and you just have the configuration of your spy piece in the first step and then you can start the configuration of your piece.

you will never get geometric deformation simulation.