Meccbell
Guest
:finger: popeye, under your post I also put my signature:smile:
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
endrio1
Guest
hello to all I introduce myself in the discussion to express my impression.
it seems to have noticed that in the end if it is 3 or 3+2 processes now assimilates the levels of the various cams are very similar and in one way or another they can all achieve good results if the user is valid on the 5 axes in continuous instead it seems to me that the problem is a bit different and that the opposite is always in agguato. other problem are the strategies of roughing with the 5 continuous axes that are often complex to manage and hardly you have a clear idea of the obtainable result and this entails considerable losses of time to perform various attempts to obtain the best result.
Concluding therefore the best cam according to me is what allows you to switch from office to workshop in the shortest possible time doing exactly what you had in mind to do, but to know it you should first learn to use it and then if you are satisfied to buy it, but this is pure utopia.
it seems to have noticed that in the end if it is 3 or 3+2 processes now assimilates the levels of the various cams are very similar and in one way or another they can all achieve good results if the user is valid on the 5 axes in continuous instead it seems to me that the problem is a bit different and that the opposite is always in agguato. other problem are the strategies of roughing with the 5 continuous axes that are often complex to manage and hardly you have a clear idea of the obtainable result and this entails considerable losses of time to perform various attempts to obtain the best result.
Concluding therefore the best cam according to me is what allows you to switch from office to workshop in the shortest possible time doing exactly what you had in mind to do, but to know it you should first learn to use it and then if you are satisfied to buy it, but this is pure utopia.
bulinorotto
Guest
If the question is: what is the most widespread?" on the site of cymdata you find first caia according to ug and third delcam.
I personally have ug and powermill, prefer powermill but for over 10 years I have earned my salary and paid my bills with ug.
this is objective.if we talk about tastes I like red blondes etc
! !
Good evening
I personally have ug and powermill, prefer powermill but for over 10 years I have earned my salary and paid my bills with ug.
this is objective.if we talk about tastes I like red blondes etc
! !
Good evening
zivago
Guest
I ask some questions:If the question is: what is the most widespread?" on the site of cymdata you find first caia according to ug and third delcam.
I personally have ug and powermill, prefer powermill but for over 10 years I have earned my salary and paid my bills with ug.
this is objective.if we talk about tastes I like red blondes etc
! !
Good evening
1) but should not the most widespread should be the medium-low band?
2) Why is this forum so little about these cams so used?
3) What led you to prefer delcam instead of ug-nx?
Bye.
bulinorotto
Guest
hi zivago
I thought they were the middle-range low ones if you look http://www.cimdata.com/news_events/press_release.html?press_release_id=39 You can make an idea.
for the choice of powermill instead of ug the reasons are really many.it starts from the calculation speed to the quality of the finish also is very + easy, and not least the assistance.
there are so many reasons!
I thought they were the middle-range low ones if you look http://www.cimdata.com/news_events/press_release.html?press_release_id=39 You can make an idea.
for the choice of powermill instead of ug the reasons are really many.it starts from the calculation speed to the quality of the finish also is very + easy, and not least the assistance.
there are so many reasons!
matteoli
Guest
hi... a mistake appeared to me when I start mastercam.
today afternoon I got stuck the pc and when I got it back and I restarted also mastercam appeared to me this writing: " no sim found " and the program does not start. What is it???? ? How can I fix it?
today afternoon I got stuck the pc and when I got it back and I restarted also mastercam appeared to me this writing: " no sim found " and the program does not start. What is it???? ? How can I fix it?