presentation new users solid edge

[davide_b]

Hi there are davide
I write from cagliari where I am head of the machine tool department in a metal company I used for 20 years m.u. a cnc with selca siemens and ecs from little use solid edge and... Of course I have some problems.

 

[Nibbio4]

Hi.

already user of the forum regarding proe and new solidedge user

a greeting to all

 

[proeias]

hello to everyone, I'm a doctor in mechanical engineering, ahimè I haven't done the state exam yet. I cable enough with pro and solid edge and solidworks that eventually for what I do seem to me quite similar. I just learned to cuff with autocad and I must say I'm sorry I didn't learn it before!

I do mechanical design and am a fan of motors and technology in general (strano eh) thank you and greet you!

 

[Solidoignoto]

hello to all, I am basil from limbiate (mb) I am 45 years old.
I've been working as a designer for 20 years (+ of course other) with autocad.
I have spent several companies for which I have matured several different themes between them, e.g. machines for the vacuum forming of thermoplastic plates, equipment for the logistics of transport (tunnel, loading platforms, fast doors, safety exits, etc.), etc.etc.
I am now struggling with quality control/project/praparation manual/exploded for a company that produces professional coffee machines.
This involves the aid of 3d programs such as solid edge.
I'm trying to imprison myself in the moments of death.
the version used is if st.
I am happy to be part of this forum and I hope to be useful to you as much as I can succeed (although my exp. on if practically does not exist).:smile:
basil

 

[diabolical.frustration]

Hello everyone,
I have just recorded myself on the forum, though for years I have drawn "fraud" to the valuable information found there.
So I begin by thanking you for the useful and sometimes funny discussions that you fly.
I have been working as a mechanical designer for a few years, currently in the company where I am mostly using solidedge mio despite and fortunately every so much solidworks.
See you soon!

 

[diabolical.frustration]

I'm asking for help now. .
I would like to begin a solidedge discussion, but I cannot understand how to create the discussion. . .
It will be a banality but in the meantime I am trying for 10 good minutes!
I promise my future requests for help will be more interesting. . .

 

[cacciatorino]

which I am used mostly solidedge I do not know e Fortunately andni tanto solidworks.
!

Let's start terrible!!!! :biggrin:

It will be a banality but in the meantime I am trying for 10 good minutes!
I promise my future requests for help will be more interesting. . .

look at the image... .

 

[wonderboban]

Good evening, everyone!
I reacted to the forum after a long time.
I take care of small mechanical designs applied to the world of lighting and lately I've been working mostly on the commercial part. Finally I can go back to enjoy designing new products!
soon...:wink:

 

[rata pipui]

Bye to all,
the urgency of solving my problem has made me forget education! ! !
I introduce myself: I am paola, I live in the province of torino and I am graduating in industrial design.
I usually use solid edge, rhino and blender to develop my projects in 3d.

I hope I can help x the community!

 

[Frizione]

Hello everyone,
I am a mechanical ing. and I work in design in an aluminum cabinet for tightenings, my name is marco and I am 32 years old, use solid edge and solidworks!

 

[Wayne_Rox]

Hello everyone,
I'm a mechanical engineering student. I have not long been using solid edge st4 as design software for academic reasons, and during studies difficulties have not delayed to present themselves. in this site I have already found answers to my doubts and I find very exhausting the explanations of other users.
fantastic page!! ! !

 

[Be_on_edge]

Hello everyone,
I'm a mechanical engineering student. I have not long been using solid edge st4 as design software for academic reasons, and during studies difficulties have not delayed to present themselves. in this site I have already found answers to my doubts and I find very exhausting the explanations of other users.
fantastic page!! ! !

Welcome!

 

[Leroi]

Hello everyone!
I'm a mechanical engineering student. I use solid edge recently but I really appreciate this program that has enormous potential.
is from a year that I follow this forum as an unregistered user and I find it very useful.

 

[Angio91]

hi to all, mechanical engineering student at the univ. polytechnic of the brands (although, as an anconetano proud, for the joy of hunter :biggrin: the preferred university of ancona ) I must start the 3rd year.

I had already presented myself but it was probably a general presentation (I try a slight loss between the very motly sections of the forum )

use solid edge st4 (student edition) and rhinoceros 4.0

 

[GTI]

Hello
are luigi, student of mechanical ing. atunivpm(polytechnical university of the brands).
I followed a course of st4 and rhino4 this year, so I am a beginner with the capital p! but I don't forget... even because maybe in this forum I can find a valid help seen by people definitely more experienced than me.

 

[cacciatorino]

hi to all, mechanical engineering student at the univ. polytechnic of the brands (although, as an anconetano proud, for the joy of hunter :biggrin: the preferred university of ancona ) I must start the 3rd year.

Don't worry, I don't have any of these poisons, if I have to be honest, I'm not even sure if my city's team is in series b or c... :smile:

 

[Angio91]

Hello
are luigi, student of mechanical ing. atunivpm(polytechnical university of the brands).
I followed a course of st4 and rhino4 this year, so I am a beginner with the capital p! but I don't forget... even because maybe in this forum I can find a valid help seen by people definitely more experienced than me.

So I think we did the course together

 

[Marco105]

Good evening, everyone. My name is Marco and I am a mechanical engineer who has just graduated over a year. work as a designer/designer at a metal company. software I use mainly are inventor and autocad, but recently I often have to use solid edge.

 

[dyma5565]

Hello, everyone. are geometra and use autocad 2011 and archicad 14. I have a small study in the province of Padua and I am involved in the design of small and medium sized civil and craft buildings, as well as cadastral/topography. I have learned how to use these two programmes as self-taught and therefore I do not use 100% of their potential. for my work however what I have learned is enough. I still hope I can acquire, even through this precious tool, some extra skills. I already thank all of you for the tips and "closes" on the use of software that you can learn from your topic.

hello to all and good work.
steak

 

[CAVEX]

Greetings to everyone, my name is marco and I just joined the forum. Already from my pseudonym " who is in the industry" will have already understood what I was dealing with.
I work for a well-known German electromechanical colossus, my work is the selection / configuration / customization of gearboxes for steel plants.
my previous occupation was as a design designer of pairs - screws, gears and gearboxes for 10 years at another manufacturer and I used gbg up to the consumption of fingertips. now the cad use it only in consultation as the layouts of the designs automatically generates the configurator.
If I can cooperate I will offer my experience to all of you.

soon