drawings and quotation

[meccanicamg]

you have too many holes for your video card hardware. decrease model display settings and when you see holes as hexagons will be smoother. the geometry recalculation depends on the ram and the processor. He doesn't shape himself like that.

 

[tanticapelli]

Hello mechanicalmg,

I went to the editing of the extruded cutting function without changing anything and pressed the green confirmation check to let it recalculate: as you see the performance monitors still have a 40% margin on the cpu, a 50% plentiful of ram and the graphics card is taking a coffee because it is not taken into account.

Therefore tell me how caspita I have to make a perforated sheet considering also that the same will have to be inserted for tens of times inside the axieme and not least I will have to create a design of laying of the axieme with relative quotas...

so many hairs

 

[Biggmetals]

that is a limit of solidworks itself? ♪

 

[Meteor02]

What hardware do you have? (Do you have a ssd) tried to see access to the disk? Have you tried with currency performance? It seems normal to me that if the hardware takes 0.05 sec per hole if you want to represent 10000 holes it takes 50 sec. you could try to make half the sheet and then mirror it, the mirror should be lighter but it is to check.

 

[tanticapelli]

What hardware do you have? (Do you have a ssd) tried to see access to the disk? Have you tried with currency performance?

Hi.
the disk is a samsung ssd 850 evo 500gb ata device. Unfortunately, I can't understand access because I don't have the administrator's pw right now.
However I did the performance assessment (which I do not know if I take into account the hardware supplied) and the weak point is the repeat to l2.
However it is also true as you say that if 1 single hole takes 0.03 sec, then 0.03 x 5184 = 155.52 sec.
but repetition to l2 employs 212,30 sec - 155,52 = 56,78 sec that it is not known from what originated.

and repetitions are however with "geographical repetition" option activated.

Boh.

so many hairs

 

[tanticapelli]

However it is hallucinating, I place a piece of proof (no, I can't because I had to finish the program!) and look when it employs to make a linear repetition of sketch without any kind of function in the tree.

I don't know what I can ask.

Try to make a rectangular series in autocad with the same parameters and see how much it takes. and is however (with the right system variable) post editable.

so many hairs