[2d] quotature

[Dylan]

Bye to all,

I often get put into the table of rather large pieces.

Every time I start putting down quotas I never know what will be the best way to share everything in the most understandable and complete way.
I'll explain.

if I have 200 holes and little more (and a perfect math senno' ciau..) maybe I do the classic hole table (even if when I go to put id on the ciau holes they overlap all and step endless moments to give it a sense...).

if the holes are not a marasma maybe quoto with the automatic quotation that is messed up a little only when there are a little too many nearby holes.. But it's obvious.

the beauty comes when I have to do the details. Open up. Will I or will I not?? ?
I'll take the detail.
I create the view of detail. Bam appears to me in scale 5 meters from the edge of the cartilage, and I can't take it off. Now I have to put down quotas.
I would like to be able to put down quotas (of course referred to zero piece) but I can't. zero is five meters and I would have witnesses of the gigantic quotation, not shredded by the detail view. Coordinated label. Close the hut. reopens the file of cad. applies the labels, save, reopen, update, hope you do not funeral of the quotas (when the quotas become white corpse) and apply the labels. And don't forget about anything, you need to remake the string. if you have 50-60 vien on an incredible mess. then you notice that the labels do not apply in the view in detail.

in detail I would like to understand how you quote the views in detail. . I believe and I am sure I have some gaps and surely with some cunning or what else you do.. But how? then.. how do you hide the terna of a view in detail? ?

I expect someone in honor and raison of true enlighten me and subtract me from ignorance. or simply suggest to me a solution "the classic faicosi'chevienbenelostesso that in a more or less professional way let me export to the plotter drawings worthy of being called so.

dylan

 

[Mocca]

Hi, dylan.
consulates; listing large tables is always a big mess. to help you better I would like to understand why you have to create details and then quote certain positions regarding the terna.
However you can try to adopt these 2 solutions:
1st creates multiple boards (with incriminated views) identical to each other by simply making the copy-paste of the view without recalculating it. then on each view you will decide to quote only a certain type of drilling. in this way avoid storming a single table of myriad quotas. in the cartiglio you will write "tav a of n valid only for the centers of xxxxxxx"; in the other tables you will ski "tav b of n valid only for the centers of yyyy" and away.

2nd if you want to leave everything in a single table then bomb it of quotas but on the numerical values of "x" and "y" for example the center of a hole add a theme, type "p1", then you will make a detail so as to clearly show where is this point "p1" possibly indicating it with "testo con arrow".

horns and feves in beautiful travaj:wink:
Mouth

 

[Dylan]

Hello, Moucca.
therefore.
imagine the situation of the particular "great". I have to define something. a small profile? near and small diameter holes? For example.
I would like to do precisely the detail (then increasing the scale to 1:1 or more) and writing the various quotas always with the same standard, that is, compared to zero. even if I only had to put a quota in x and one in y regarding zero and then quota all the rest in incremental from there.. I could not do it! or better could I do it with a text?????!!! (which I can't associate with the views.. if I move the view the texts remain attached to the sheet and not to the view...).. I don't know.

Every now and then I make several tables as you suggest, of course. .


You didn't enlighten me on some issues that I exposed in the first post... like the terna of the views in detail that appears and I can't make it disappear. the overlap of the holes id.. the possibility to put only one label per file cad... the impossibility to quickly edit the hole table to insert keyboard comments (you have to do so with the text.. that as I said it is not linked to the views or the table... ). .

How do you do/do?? ?

thanks as always, or magicians
dylan

A little help can lift me from hours of research to figure out how to do it. .

 

[monster]

Yes, but if you're on mars, how do you get her into the table? ? ?

you should probably have the opportunity to quote a hole or quota by telling the system that the share absolutely starts from the!! !

I don't know if you can... but I guarantee that maybe you and me are doing:

"the deception" to the system is possible

 

[Dylan]

the terna goes out of the cartiglio and also of much.. .
The thing is, I can't turn it off! Surely you do and in a moment... I don't know how. :

dylan

 

[garide]

ucs cannot be extinguished and turned on as in normal views, you must hide the ucs when you create the detail from the view of origin, otherwise you no longer hide it.

to quote from the ordered origin without bringing you behind the witnesses of origin, there is a method but be careful that it is dangerous:

quoti tutto putting the zero on a edge or on a hole, which must be in detail the closest to the origin, after which select all quotas, go on the menu of the quota, in the field "automatic " insert the value from zero, value that the system will add to all quotas.

so it will seem that it has quoted from the zero piece but in reality it is not.
Be careful that if you move the hole you have to manually update the value you entered otherwise you are with all holes in the wrong position.

a tip: do not use the views in detail, create only casino.
makes a copy of the view and remove the superfluous with section splits

I hope to have explained well, otherwise I am here

 

[garide]

I attach an image for quotation

 

[Mocca]

Hi, dylan.
do what "garide" also says; is the best solution for your situation.
to leave the texts anchored to the view of belonging you must make active the view on which the texts will be inserted: from the tree of the features select the view/detail, context menu (right mouse button), activate the view.
area

 

[Mocca]

garide; you set the 2d of the top with the same parameters of autocad. customise the system. :wink:
Mouth

 

[Dylan]

therefore. I tried to do as the good gaudy says. Yeah, so I should get away with it. remains that "dangerous" passage where we go to associate a quota to a model cad a manina.... where the risk of combining the damage comes alive... Here's a way to achieve the purpose, but not the way, I think. raise me from ignorance. but a caddone type catia 'ste functions solves them in a "correct" way?

I mean, sometimes I see drawings made with catia (made by good moooled operators, definitely more good than me...) that are perfect.

the views in detail have the serrated outline, the odds are absolute, etc. (and I don't think/believe they have to change the ref. .

as regards the text anchored to the views. I tried again. Yes. yes again (with accent on the first a). But I'm a little weird. It happened to me a thousand times that I couldn't anchor it. doing the same operations. Maybe, maybe, some releases over there didn't work well? The important thing is that it works now. But I can't associate a text previously written to a view. I have to rewrite it. . .

as always thank you so many boys for the useful advice.
dylan

 

[garide]

garide; you set the 2d of the top with the same parameters of autocad. customise the system. :wink:
Mouth

2d settings are the same as I used on it, colors, fonts, etc. I don't know if they're like autocads, I never used it...

My system is a little personalized, I put my hands to everything:biggrin:


Hi.

 

[monster]

urgent! ! ! ! !

I need a favor... tell me how to make the ordered quotas,
I have to share profiles with derived views

 

[Mocca]

then look at the annex.
click 1 (axis end) defines your "zero"
click 2 (generic in space) defines the position of the quotation line (horizontal)
click 3 (axis end) defines the creation of the "zero" value
after the 3rd click you must confirm with the central mouse button.from this point onwards you can select any entity to quote but at each selection made with the first mouse button you must always confirm with the central mouse button (click 4 and click 5)
if you have to add other quotations in the future, just double-click with the first mouse button on one of the many quotations belonging to the quotation, confirm with the central mouse button after which you are again ready to select the entity (first mouse button) and confirm it with the central key.
we waved

 

[monster]

magic.... it works great

question... does it work only on normal views or can I also quote on a derived view type that I know a detail to enlarge and quote from an axis that is not included in the detail view?

thanks:redface:

 

[stinit]

...the mesa at the table of toptron sometimes does bizarre things (faded rates, vanished silhouettes etc.) ...say that with the 10 they have solved many problems on the table...we will see. . .