• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

3d soil creation

  • Thread starter Thread starter kamikaze
  • Start date Start date

kamikaze

Guest
Good morning to all, I'm not able to create level curves in cad. I have tried and I have seen that there are lisp that in theory should automate the procedure. The problem is that in the cad that gave me quotas are, I think, only written as text.
How do I do that? Please help me.. .


ps: I can't attach the dwg (weight on the 25mb), if anyone wanted to see it I send it by mail.
 
kamikaze said:
Good morning to all, I'm not able to create level curves in cad. I have tried and I have seen that there are lisp that in theory should automate the procedure. the problem is that in the cad that have given me quotas, I think I'd like to think about it., only written as text.
How do I do that? Please help me.. .


ps: I can't attach the dwg (weight on the 25mb), if anyone wanted to see it I send it by mail.
Click to expand...
:confused:
only attaches part of the dwg.
 
dieva said:
look and download here:
Click to expand...
thanks for the recommendation. :smile:

note per kamikaze:- textpoint e autocurve sono due utility allegate ad autoSAs regards the first, it is advisable to use this version as the texts to be treated can reside on any layer.
- before using dtm.vlx, turn off the layer of the texts, otherwise they are treated by the procedure (they are at 0,00)
- before use of autocurve tax peditaccept = 0
 
thank you very much for the support I managed to do everything, the only doubt is about trucks. when you ask me to set the fairness, would it be the height distance between the different level curves? and a 1-foot approach would match?
 
Excuse me, one last doubt, is there a way to increase the number of points to be processed with dtm? when I want to apply the command for type 40000 points, it's like it didn't work. Thank you.
 
kamikaze said:
Excuse me, one last doubt, is there a way to increase the number of points to be processed with dtm? when I want to apply the command for type 40000 points, it's like it didn't work. Thank you.
Click to expand...
in the doc attached to dtm.vlx there is written that elaborates maximum 2000 points.... you should call it several times.
 
It is not easy, let's say that each selection should have within it a 'fascia' of common points to the next selection so as to have common areas to overlap... but this is only theory, especially this hour at night;-)
 
ahahahah I imagined I had to make such connections, maybe using the 3d triangles previously processed by the dtm.
I will try to divide the area in bands so as to connect them then in a uniform way... I will let you know what kind of result I can get. ;)
 
on my not exceptional pc a triangulation of 40000 (40 thousand) points performed in 15 seconds, I believe that this of elpanov evgeniy is the program in lisp faster in the world to create dtm.

so much to make a comparison, on 1000 points:dtm - 9.18 sec.triangulate (of elpanov evgeniy) --> 0.29 sec.

this is the page of your site http://elpanov.com/index.php?id=6, to take a look perhaps it is better to have an automatic translator. :tongue:
 

Attachments

triangulate, vlx superbomba boooom!!!! incredible indeed, I did not in time to give him the sending that completed the operation in a nanosecond...thanks

Is there not some lisp with the same function as trucks working equally fast?
 
I really apologize, but considering that after doing the triangles, using autocurves on 80000 triangles seems infinite if not impossible, it is already crashed 2 times (maybe I mistake some settaggio). but what I would like to know, if after doing the level curves, I wanted to create with those curves a solid pattern of the ground, how should I operate?
 
I break the ..... for the umpteenth time, if I use triangulate, and then I use autocurve, the 3d polylines of the level curves are not drawn, I do not understand why.
 
do you have an exaggerated 3d model, since you are a student because you do not use civil3d or map3d for these operations?
 
I had thought about it, but I thought we could do it with cad, and I should put buildings in 3d above the ground, and I have problems. 3d land with cad and 3d buildings with cad and exporting the two rows separately in revit I can not stand them independently on the ground.
 
because you do not usepocal if you have of these problems is in Spanish and there are 3 versions, the first is free the second you have to register and" always free the software wants a code that you can get online, the third seems to me not much cost
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 92 (members: 0, guests: 92)
Back
Top