• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

(autosez 2) soil sections and profiles - automatic extraction

Cristallo said:
liber, hi
I don't think the goal/ intent of gp or confutatis is to get something extra.
I know them enough to know that the last of the thoughts of both is a (even minimum) economic return.
It's just anger, trying to solve other people's problems and then being completely forgotten.
This kind of people, are known in the cyber jargon as "leecher" (vampiri), so I agree widely with what is said by gp. an eye to the number of user posts could be a just discriminating one. . .
Click to expand...
Hello crystal.
less bad. I already thought I'd get a 1000 euro bill to pay.
apart from the jokes, I confirm everything you say.
I wrote for a few years on ingforum and I must say that it was very annoying, when preparing a long answer, maybe even with references of images (which involve a certain processing), and then not even receive a thanks.
I intervened with a joke, without even knowing who was referring to gp.
but, for what little I have seen both gp, and confused are really experts of lisp.
once I went to the autodesk to get some information. I was told that, in addition to the autocad license, revit and structural robots, I had to make another subscription to have a lisp advice.
It's good that users know the usefulness they give people like you.

hello to everyone and good Christmas
 
Good morning to all, I apologize for not thanking those who solved the problem after answering my question in previous days, I didn't want to be rude to anyone. .
good work at all
 
GP. said:
by now the embassy is to arrive, to use, to be solved problems and then I fail to thank, everything is due.

I will no longer deal with the problems raised by those who face the forum for the first time, I will try to take into account only the "fidelized".
Click to expand...
I apologize, for not thanking it was not my intention to be rude or take advantage of your help. .
next time I will give more celery in the answer..scusate again and good work to all.
 
I find it very useful.

as I have had to use the as-profile lisp to project the track to the level curves, obtaining a polyline (always 2d) on which I entered the cartilage through the autosez_2 lisp. This is all right, except for the fact that at this point I have to enter the quota of the first point, from which the lisp autosez_2 creates the cartilage as a result. This may be a problem or an inaccuracies in all those situations where the initial point of the track does not coincide with a level curve of which I know the altitude. I was then trying to walk another way:
through a lisp found on this site (the name of which is creating profiles) I get a cloud of points starting from the curves of level.
I then tramire a second lisp (which I always found on the net and which is called triangulate) I create a dye .
I would now need to project my track (i.e. polylinea 2d) on the newly created dye, so as to obtain a 3d polylinea from which, through the list autosez_2 create the cart.

Does anyone know how to do that?
thanks in advance
 
antoniman said:
Sorry I'm late. I just read the post now. Of course you can do it.

1- draw your straight lines on the basis of the design indications

2- turn lines into one polyline with autocad commands

3- with autosez create 2d polyline profile on cartiglio

nb: if you do a couple of tricks you can also and place the cartilage exactly below the previous one, of course you can exclude the double fields

I hope I've been clear

greetings paolo
Click to expand...
Excuse me. I am new here inside but also in the use of the most useful autosez2. I have problems, despite the video on youtube and the directions read in the blog. I just can't get a profile despite you seem to follow the directions to the letter. Then I started to go randomly. the only thing I managed to get is a perfectly flat profile!!! that is not adherent to reality. Could someone give me a holy hand, please? Thank you.
 
View attachment Help2.dwgthe dwg should be attached (spero). I try. It's the first time on a blog.

My problem is to create the longitudinal profile of that simil access road that the client wants as you see in the dwg.
also following the indications of the video on you tube (although reported to autosez and not to autosez2 I imagine the concept is the same) there is no towards!!! I have to create the profiles at times (and then I have to adjust the progressives and everything!!).
Can you tell me how to reach the destination please?

p.s.: cmq great work to create these applications. extremely useful. My best compliments! ! !
 
GP. said:
for the profile on the 3dfaces of the dtm turns the axis of the road into polylinea (or constructs one above), then follow the indications of this post:http://www.cad3d.it/forum1/showthre...tion-automatic&p=214328&viewfull=1#post214328
Click to expand...
thank you 1000 for the straight, and as always for the willingness to listen to all the needy like me, but unfortunately it seems not to work.
I've got two cases. Sometimes it makes me wrong, sometimes it ends without doing anything.
below you cover-neck what comes out written on the autocad text window. the following msg is that of error:

________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

command: p.a.

*
*
*_using current settings: auto = on, control = everything, combine = yes, layer
= yes
type the number of operations to cancel or [Auto/Controllo/INIzio/Fine/Segno/INDietro] _begin
command: _ucs
Current name ucs: *global*
specify uct origin or [Faccia/con
NOme/OGgetto/Precedente/Vista/Globale/X/Y/Z/Asse-z] <globale>_w
command:
select the line or track polyline
*
*
*
*; error: an error occurred within the function
* error* setting of the autocad variable rejected: "Osmode" nil
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________


this is the list of when it seems to work but in the end I do not get any results:

________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
command: p.a.
*
*_using current settings: auto = on, control = everything, combine = yes, layer
= yes
type the number of operations to cancel or </globale>[Auto/Controllo/INIzio/Fine/Segno/INDietro] _begin
command: _ucs
Current name ucs: *global*
specify uct origin or [Faccia/con
NOme/OGgetto/Precedente/Vista/Globale/X/Y/Z/Asse-z] <globale>_w
command:
select the line or track polyline_ucs
Current name ucs: *global*
specify uct origin or </globale>[Faccia/con
NOme/OGgetto/Precedente/Vista/Globale/X/Y/Z/Asse-z] <globale>_p
command: _Undo current settings: auto = on, control = everything, combine =
Yes, layer = yes
type the number of operations to cancel or </globale>[Auto/Controllo/INIzio/Fine/Segno/INDietro] _end
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Would you have any other suggestions please?

:36_1_4:
 
Fabio1973 said:
...this is the list of when it seems to work but in the end I do not get any results:. . .
Click to expand...
look well, the lisp creates a 3d polylinea on the model, then "glued" to the 3dfaces, you do not notice because in view from above it is exactly opposite to the section polylinea.

in autosez you can then get the cartiglio with the option of data extraction: "3d polyline on the model" (the newly created one).
 
GP. said:
look well, the lisp creates a 3d polylinea on the model, then "glued" to the 3dfaces, you do not notice because in view from above it is exactly opposite to the section polylinea.

I reconnected to write you the same thing. At the end I saw that it actually created something and the fury of "to destroy" I arrived. It would seem that this works. I don't understand why, however, he couldn't create the profile directly with autosez2.

anyway thank you endlessly for the help and compliments still for the very useful work you carry out. It is not said that in the future it has no other problems to submit to your competence.
Now you're sending me an invoice? I hope your bill isn't too salty. :smile:

jokes aside thanks 1000 and congratulations again

p.s.: a greeting to the city of vercelli. I lived there for 4 years
Click to expand...
 
Please.
with autosez you can only treat "lines" of section, not polylinee.
I greet you all. :smile:
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 76 (members: 0, guests: 76)
Back
Top