check position tolerance (cmm)

[Shelby]

Hello!
I have been looking for a code on pc-dmis that helps me verify this tolerance of position:
Regardless of the software, I tried to tastare points within the venue to extrapolate average points to assess their coordination with respect to the ø89.5 cylinder axis.

Does anyone have any ideas/points or have ever dealt with this kind of control?

Thank you so much in advance!

ps I hope I have not wrong section, but I have not found a specific one.

 

[meccanicamg]

hi, to logic rigor you have to make two measurements: between the two edges to verify 6h9 and the other that the average straight is ±0,2.
it is necessary to take the norm and read carefully as it considers geometric entities.

the iso 1101 for the speech position without datum says to go to see iso 5458.

 

[TETRASTORE]

there are many videos related to pc.dmis; I dedicate two links that report to dozens of video tutorials on the topic with related codes; Try to see if you find anything that helps you, or wait for a user who knows this control system very well.video 1 (24 video)video 2 (133 video)