creo parametric tolerances tree hole

[painaz]

other material to configure.

between this and jambo should be satisfied all expectations
View attachment leggimi.pdfView attachment configurazione.rar

 

[JAMBO1970]

Okay, thank you.
once you create the new "from" path (which I find under "ownership" by clicking with the right button on the creo icon) to create the under folder "temp" and having modified the <trail_dir> in the config.pro the value of the new path, then do I have to keep in "from" on new path or do I have to reset it? If I have understood correctly the new folder is "only" to collect the "trail.tex" this involves having the "swimming" in a separate folder. while "iso.dtl", "luigi_drowing" and "luigi_start" remain under "documents", right?
when I go create a new design remove the check from "use default mask" - "use mask" - "sfoglia" - "luigi_drowing" - I choose the format. At this point I have a drowing with American views already set with relative quotas and notes that I create in part 3d. It also tells me that quotas are normalized according to din standards while I use iso, and do not appear squares. If I use the empty mask and select the format these problems do not occur to me. how do I proceed? Can you send me something in this case? and what is the procedure for inserting the squares with related cards?
As for the "start_asm", the logo-free cartilages and the 2 files that are called "bolle.dtl", "boom.fmt" I gladly accept, without haste (which I think will be put under "documents"? ).
still thanks bisanzio330</trail_dir>

I created a basic configuration for you using the cartilians made available by the gentle painaz.
to leave I think it can suffice, copy it simply in c: and attribute the percose to creo as I have already instructed you.

Hi.
jambo

 

[Lorenzo PigFolyd]

hello luigi, regarding the drawing environment there are well over a hundred settings
that control the appearance and functionality of a design.
although some of these are contained in the "config.pro". most are included in a setup file.
when a design is created for the first time, it contains the settings of this file.
in this file are specified about 130 settings that also include those you require.
in the attached_creo folder I created the file that is called "luigi_drawing.drw", copy it to your
working directory , add to the config the voice <template_drawing> indicating in the heading "value" the path
of such file.
to change the values of that file in creo 2.0 open the file then from the file menu>prepara>property design>options detail>change.
other important file is the iso.dtl file,in this file are contained settings such as projection orientation,section selection,
the orientation of the texts etc.
I have attached a file of this type, to use it copy it in your working directory and add to your config.pro
following entries:
<drawing_setup_file> in the value item the path.
<format_setup_file> in the value item the path.
the procedure for tolerances is what I listed at the beginning of this discussion, as you failed I attached a start part
which is called "luigi_start.prt", copy it in the working directory, add to the config.pro <template_solidpart> in the value item the path.
already contains the tolerances you want to see.

Hi.
jambo</template_solidpart></format_setup_file></drawing_setup_file></template_drawing>

Good morning.

I have another kind of problem.
I can't put the tree/hole odds.
I followed the procedure you indicated but, inserting iso and uploading the tables no longer allows me to set the example value of tolerance, it appears not editable.
everything works perfectly when I am anxious, i am free to edit the tolerance but if I want to insert e.g. h7 (with its value) it turns out not "clickable".
always with iso as mentioned before I have the possibility to edit for example symmetric tolerance or at least tree/hole.

under an example of the problem:

so it is set in bends, as you see I can change the value of symmetric tolerance.
but if I want to insert the shaft/hole tolerance, I can't.if setts iso as I can not edit es.h7 even the symmetric.


I'm totally freaking out, thank you very much for your help! !