detailed view and annotations

[cacciatorino]

if I make notes in a view (assis, welds, etc.), then these are not reported in a possible detailed view, and I have to remake them as head. Is there a way to import them from the original to the detailed view?

 

[re_solidworks]

I use a lot of drag with ctrl for quotas and copy paste for other annotations. Please note that you can import model annotations, or even better use dimxpert. in dimxpert quoti in model 3d (there are no feature creation odds) and then amounts in the views. the same applies to other notes.

 

[lelepanz]

hunter ... I don't remember .. what version do you use 2010?

 

[cacciatorino]

hunter ... I don't remember .. what version do you use 2010?

Yes, 2010 sp4 32 bits

 

[lelepanz]

when you design a component (which has holes for example) the axes show you automatically? because there is an option that allows you to take them inside .. even if I no longer remember what is ...

cmq also to me the axes brought in me shows them , welds and axes added after no ... :/

 

[cacciatorino]

when you design a component (which has holes for example) the axes show you automatically? because there is an option that allows you to take them inside .. even if I no longer remember what is ...

cmq also to me the axes brought in me shows them , welds and axes added after no ... :/

someone yes and someone no, I have not yet understood what criterion he uses to decide which to show and what not.

Probably the biggest problem is that I still have to get used to automatisms other than those of myself.

 

[sampom]

someone yes and someone no, I have not yet understood what criterion he uses to decide which to show and what not.

Probably the biggest problem is that I still have to get used to automatisms other than those of myself.

try to play among the options:Hello
marco

 

[re_solidworks]

I insist a little, try to look in the help if dimxpert can do for you, it is fast enough to use.

 

[sampom]

I insist a little, try to look in the help if dimxpert can do for you, it is fast enough to use.

absolutely true!

greetings
Marco:smile:

 

[cacciatorino]

I insist a little, try to look in the help if dimxpert can do for you, it is fast enough to use.

I'll watch tomorrow, I promise!

 

[lelepanz]

I rather dimexpert often amount the elements of the model (including rates).
For example, the problem of your other topic's share has solved it like this. :

 

[re_solidworks]

with model quotas there may be 2 problems: if the part was made in topdown or extracting the bodies of a welded there are no odds inside it. other times it is necessary to give certain quotas to the features, but others for the construction.
dimxpert is as free as the table, only that you do it once in the model.

 

[lelepanz]

with model quotas there may be 2 problems: if the part was made in topdown or extracting the bodies of a welded there are no odds inside it. other times it is necessary to give certain quotas to the features, but others for the construction.
dimxpert is as free as the table, only that you do it once in the model.

certainly. what you say is 100% true.
In fact everything is to be evaluated from piece to piece from situation to situation.

then I repeat, I haven't tried yet, but they say (or better said) that both modes were optimized in sw 2011.
We'll see.

 

[simra]

I rather dimexpert often amount the elements of the model (including rates).
For example, the problem of your other topic's share has solved it like this. :

I exhume the discussion to know how to display in the table 2d geometric tolerances and reference planes (a,b,... to understand us) made with dimxpert.
I can use model quotas but not to display geometric tolerances.
Thank you.

 

[SolidUser]

I exhume the discussion to know how to display in the table 2d geometric tolerances and reference planes (a,b,... to understand us) made with dimxpert.
I can use model quotas but not to display geometric tolerances.
Thank you.

as it amounts the quotas of the model, also amounts the quotas dimxpert.

 

[SolidUser]

if I make notes in a view (assis, welds, etc.), then these are not reported in a possible detailed view, and I have to remake them as head. Is there a way to import them from the original to the detailed view?

excuses to, but if you write notes on a view, the relative view of detail also displays the annotations present on the father view?
in solidworks no.
the view of detail only enlarges geometry.

 

[simra]

as it amounts the quotas of the model, also amounts the quotas dimxpert.

I use the release 2010, can you tell me the command to make dimxpert odds appear?
from the menu: insert -> template elements do not find the option dimxpert

 

[SolidUser]

I use the release 2010, can you tell me the command to make dimxpert odds appear?
from the menu: insert -> template elements do not find the option dimxpert

select the view and in 'import options' find what you are looking for.

 

[simra]

select the view and in 'import options' find what you are looking for.

:finger: thank you, with your help and the solidworks guide, which I must say is really good, I solved! :smile:

 

[erik.bo]

for solid.. .

If v20 does not, it enlarges the view like magnifying glass but does not report the axes.... .

dim expert....but it's not a long thing?I thought it was only necessary to set geometric tolerances, what to exploit if the piece is executed from 3d!