Parametric_Ozzy
Guest
I mean creo parametric (ex foundation xe), few know that there is also creo essentials within which there is no flexible modeling, but freestyle yes.
Er Presidente
Guest
in my humble opinion those of ptc marketing have some dysfunction in the endocrine system, tell him they showed up by a good one.
:biggrin:
cacciatorino
Guest
They have hired a former marketing director tim-vodafone. :biggrin:
however also to cocreate are not less:
http://apps.cocreate.com/downloads/data_management/17.00/readme/platform.html#licenses
Er Presidente
Guest
always criticize! ! !
instead of thanking us for giving you the light...
p.s.: there will be a reason if there is "feeling" between ptc r cocreate!
:smile:
nicksoft
Guest
a me freestyle_design_extension on creo 1.0 does not work with current licenses (pre-cree licenses)
maxopus
Guest
really with pre-create licenses, should not really leave.
It's like you want to start wf5 with wf4 licenses.
It's like you want to start wf5 with wf4 licenses.
nicksoft
Guest
My licenses are "compatible" I create, in fact I create part.
but they are still in the old configuration (foundation, advanced, etc), and not in the new one concerning new purchases or licenses that I will decide, to the next renewal of maintenance, to pass to such configurations (creo engineer i, creo engineer ii, etc.).
only the latter have flexible modeling and manikin included in all.. .
and perhaps the freestyle extension, also included in the base, but in the new configurations. . .
maxopus
Guest
You're "fucking" my ideas.
I had the wf5 licenses with which I also created elements parametric 5.0, in July I asked for the new licenses for creo 1.0, they sent it to me, I installed creo 1.0 and all the funzia to duty.
but what are these configurations create engineer 1 and 2?
Mah.
I had the wf5 licenses with which I also created elements parametric 5.0, in July I asked for the new licenses for creo 1.0, they sent it to me, I installed creo 1.0 and all the funzia to duty.
but what are these configurations create engineer 1 and 2?
Mah.
Parametric_Ozzy
Guest
If you listen to me when I speak, you understand. .
creo parametric is the former pro/e foundation xe, inside creo parametric there is the flexilble modeling, but the freestyle yes.
creo engineer 1 instead has inside the flexible modeling + the manikin, while engineer 2 that plus the choice of one of the advanced modules:aax, bmx or mechanism dynamics.
then there is also creo essential 1 and 2.
creo essential has only the old proe more flexible and not manikin, mentro essential 2 has the latter more advanced assemblies at a more competitive price.
so for those who had an old foundation xe can only have creo parametric.
if you have doubts ask yourself.
greetings
creo parametric is the former pro/e foundation xe, inside creo parametric there is the flexilble modeling, but the freestyle yes.
creo engineer 1 instead has inside the flexible modeling + the manikin, while engineer 2 that plus the choice of one of the advanced modules:aax, bmx or mechanism dynamics.
then there is also creo essential 1 and 2.
creo essential has only the old proe more flexible and not manikin, mentro essential 2 has the latter more advanced assemblies at a more competitive price.
so for those who had an old foundation xe can only have creo parametric.
if you have doubts ask yourself.
greetings
nicksoft
Guest
I understood...but in my creo (I tried starting with several licenses from foundation in up) the freestyle does not leave, tells me to contact the dealer. . .
perhaps because my last maintenance contract dates back to 3 years (triennial) and at the time the licenses were made in a different way?
maxopus
Guest
The President is right, you must be treated :smile:
I realized that the fmx is not part of the basic package (creo parametric or call it as a bitch you want), while the freestyle is in all the packages, but why in this case does not act?
you have renamed and reviewed packages without even sending a scrap paper to customers (not you in particular ... the ptc) so they could understand.
who had an old foundation + aax license, today what is found?
and who had a foundation + aax+rex?
mystery of faith.
cacciatorino
Guest
I think it takes the tomtom navigator to understand something! :biggrin:
Er Presidente
Guest
I can say with certainty that this is thyroid, probably overlooked mel time, hyperthyroidism, I would attack.
in the immediate use of lithium in "extreme" doses to normalize the mood and exit from the depressive/compulsive crisis, in the medium term I would say to provide for any kind of physical coercion, even the intern would be, at least, useful.
:biggrin:
Parametric_Ozzy
Guest
probably does not leave because the license is not updated...
that's all!Ciccio, this job (to explain the packages or to send you a piece of paper ragged with explanations) should have done your dealer, not the ptc that this time they expire, what does it take?
on the phone, by e-mail, by skype or even better in person.
I warned them all, if others don't, and they don't make you understand a bat, it's not the ptc's fault.
who has an old license foundation xe + aax finds itself creating parametric + aax unless an upgrade has been made to a single package.
idem for rex and all others, rex is not in any package, it is always an advanced module.
♪
Parametric_Ozzy
Guest
Who uses garmin is out! :smile:
I am the light....
uluwatu_74
Guest
exceptional!!! you don't understand a bat!!! !
I saw the free style....and at times I was "sbroken" as my usual in these cases!!!! :biggrin:
it seems to me is moooolto similar to t-splines of rhino but with the difference that it is inside a cad "eccceziunale"!!! And that's really hot! ! !
He's broken his bones and nx together!! !
:36_1_13:
I saw the free style....and at times I was "sbroken" as my usual in these cases!!!! :biggrin:
it seems to me is moooolto similar to t-splines of rhino but with the difference that it is inside a cad "eccceziunale"!!! And that's really hot! ! !
He's broken his bones and nx together!! !
:36_1_13:
Er Presidente
Guest
heal from the disease and see the "light" make euphoric!
enjoy this moment and one day tell your grandchildren!
p.s.: also try to remind him who has released you!
:smile:
uluwatu_74
Guest
my "nipotine" already "sanno"!!! :biggrin:
p.s. for my "you don't understand a bat" I refer to the names and packages and not to the use of the software!
Parametric_Ozzy
Guest
Try to figure it out... He's old too, I know a guy who's gonna do a good job and test it!:biggrin:
nicksoft
Guest
even more wonderful when, after using the free style, I opened the table and saw the odds still pointing to the old position of the feature! :smile: