emergency emergency

[genesis1975]

All that is reported always puts it in the main destination folder. . I should go to the options now and say that you don't load the reference documents anymore... what option do I have to put?

 

[MassiVonWeizen]

Now you remember that I had made several sketch configurations to give the coincidence on all the assemblies and to be able to bind them?

No, I don't remember. you opened 150 posts on references

You told me.

quindi? in The debate I also wrote

a parametric cad requires a good organization of files and references and you can not think of doing things to good thinking of saving time to make configurations, to remake a particular, to use logical origins and plans, to structure folders... then go out holes the messes that make you lose the triple of the time you thought you had saved

e al post #26

the pack&go makes a copy of the selected file, together or part, including all references in it.
if it is a set will copy all parts, drawings (if selected) and any assemblies with shared references (but not the parts contained in these possible assemblies)
if you draw a part you will copy the drawings (if selected) and any references to other parts or assemblies (in this last case you will copy only the assemblies and possible share)

I no longer know how and sauce explain to you the logic of rriments

the other day I gave that option to open beyond the one chosen, all the documents in reference....and then the pack&go opened me also the other assemblies...can this be the motivation?

If you want to open the axieme, it has nothing to do with the references included in the pack&go.

 

[MassiVonWeizen]

All that is reported always puts it in the main destination folder. . I should go to the options now and say that you don't load the reference documents anymore... what option do I have to put?

I have to remove the spuns from the documents you don't want to upload.

there is the option include subfolders for the search of drawings in pack&go, but you have to understand:
- how to behave and if you mean only slddrw files
- if it is present in 2012

 

[genesis1975]

then does not depend on options > external references > upload documents in reference > or all or none

or

-Search external references in file positions

 

[MassiVonWeizen]

options > external references > files in reference

is explained in the guide to what you need
upload documents to specific reference whether to upload or not referenced documents when it opens a document with external references.stressasks to upload the documents reported externally every time you open a document with external references.Allupload all documents reported externally.Nobody.does not charge any document reported externally. external references may appear out of context until documents are opened externally.solo i modificatiload only documents reported externally that have changed since the last opening of the original document.

 

[genesis1975]

Okay then it doesn't fit in my case... but in the pack and go I can uncheck the spring, but not the joint referenced to the spring. .

 

[genesis1975]

no, you're right, I can also uncheck the associated axieme

 

[genesis1975]

However now that the referential assemblings put them in the pack&go I can delete them without consequences?