engraving curve part

[MaxBigno80]

Bye to all,
I have to hack a sketch on a spherical part so that the depth remains constant, how can I do?

Thank you.

 

[MassiVonWeizen]

command avvolgi

 

[MaxBigno80]

done but unfortunately does not work solidworks 2019

 

[Meteor02]

strange, from 2017 onwards should wrap on any surface. I have 2016 and nn can help you but if you place the file surely someone with your version that makes a test you find it.http://help.solidworks.com/2018/italian/solidworks/sldworks/t_create_wrap_on_any_face.htm

 

[MaxBigno80]

here is the file...the depth must be 0.4 mm
Maybe I'm wrong with some passages. . .
Thank you.

 

[MassiVonWeizen]

if exported in iges format should be able to export even the sketches.

sure that to help people you should know how operations are done, what mistakes are found... it is not that writing does not work to understand what happens

 

[MaxBigno80]

created the sketch of the shape to be engraved, select coils, select the sketch, method wrapping surface spline, face winding the deep spherical part or,4 mm tells me that "unsuccessful winding the center of the sketch must be projected on the section"

 

[MassiVonWeizen]

Did you do two different sketches?

 

[MaxBigno80]

no a unique sketch with double c shape

 

[MassiVonWeizen]

fanne due

 

[MaxBigno80]

Hello Massivonweizen
I tried to do the two sketches as you suggested to me, the first one does the second gives me the same mistake before you make a second sketch making a working mirror. ...
thanks max

 

[MaxBigno80]

allego image error

 

[MassiVonWeizen]

try to mirror faces instead of processing.
attach the sketch in dxf

 

[MaxBigno80]

There he is. .

 

[MaxBigno80]

Unfortunately, not even mirroring the faces I solve the problem, I think it is a problem of figure but I do not honestly understand why

 

[LaboratorioDieci]

That's not good. Cut out the crossroads for how it must be the final result.

 

[MaxBigno80]

That's not good. Cut out the crossroads for how it must be the final result.

ciao shirokko in che senso?

 

[MassiVonWeizen]

dxf must be identical to that of 3d including origin.
opening the two dxf is clearly seen that the origin of part 1 is different from twin.

edit:
Like I didn't say, I took a bark. Sorry.

 

[LaboratorioDieci]

ciao shirokko in che senso?

in the sense that the system might not understand what to do with the areas in which they intersect.

 

[MassiVonWeizen]

That's not good. Cut out the crossroads for how it must be the final result.

cut the inner lines between the two c