flat suction design

[Utente cancellato 70856]

hi motocad only works if you interview with someone who understands us little or nothing, because a wake up makes you tana in half interview.. . .
I prefer the boys who tell me the truth about what they know or believe they know, but they have sincere eyes and a passion declared for mechanics. ours is a difficult job and if you have no passion you never learn it.
I'm sure you agree with me because I've read more of your speeches and you don't seem like a... come from the soap mountain!
Sorry if I'm ot, but on the famous suction plate I don't feel I can make any contributions.

We don't start talking about who's interviewing you, because I could tell you about cooked and raw: eek:, I'm big, I'm on my doorstep. and I confess that I have lied in the past and I admit that it was better than when I was sincere :

 

[Fulvio Romano]

and the cellarers triumph.... I will be very boring but I repeat what I said unpleasantly several times: the crisis has not cleaned enough because the market is still gagged by those who are angry or invent experts. in a little bit anyone can design, do, discard, so those who have made an ass so much to learn something.

I think the story is a little different.
we live in a world where "who studies is an arrogant, who reads for five minutes on google is a brave thinker" (who said it?). this always, from engineering to medicine, from economy to finance.
it is soon done to be dragged by this way of thinking, supported by transmissions in which an equal comparison is proposed between a nobel for physics and the mage otelma.

 

[Robert Tutu]

So if I created this discussion means that there is something I can't do, to respond to Roman fulvio little, I have no shame in saying that I'm still inexperienced and that I still have so many things to learn, said that I don't understand why you have to make useless discussions as I asked for advice. If no one wants to answer it may well not do it, I do not seem to have asked such a tragic question, I leaned on this forum because there are a lot of good designers. It is not a shame to admit that you do not know, it is a shame to admit that you do not bring home results... then it is clear that you do thick as you know how to design and if I have to tell you the truth is worth zero as people, I hope that one day they will put your feet in the head of people who know more than you!
p.s: my boss is aware of my inexperience do not worry you

cordial greetings to all

 

[Fulvio Romano]

then if I created this discussion means that there is something I can't do, to respond to the Roman lightning just a little [...]

Yes, even being rude out of context is enough. Just read here.

You made the joke of the century Uncle.... do you know what you can do? ?

Let's see if you guess.. .

continuing to read. . .

then it is clear that you do thick as you know how to design and if I have to tell you the truth is worth zero as people, I hope one day they put your feet in the head of people who know more than you!

and here comes the aggressive tone and out of place. once you would have been banished for much less, but probably moderators are losing the verve. Maybe that's right, before you actually walked on the eggs.

You, a little man with a gergal diction (make him thick, Uncle, but with whom do you think you have to do?), are you wishing my feet in my head by someone better than me because you consider me arrogant? Are you accusing me of worth zero as a person because you misunderstood a post? But you really do?
I know you little because in this forum you just asked two fucking questions, but before you give me arrogant, you don't have to go see any of my posts, just to measure who you're facing?

 

[Robert Tutu]

In fact, I'm not questioning your skill, we'd miss it! I'm sorry that you don't understand my way of speaking but it doesn't matter, I don't use any arrogant tone on the contrary I'm very quiet, I'm wishing you to feel as I feel when I read that I don't know anything, at my house nobody shuns anyone and certainly nobody looks at the skill of the other person and judges! I only said that you are worth zero for the speeches you have made, as I do not allow me to judge anyone based on his experiences!

 

[rero]

study, commitment, sacrifice and humility...this is the work of the designer. If the last one is missing... I just want to leave.

 

[MassiVonWeizen]

then if I created this discussion means that there is something I can't do

but it was no longer obvious and logical to tell your superior, at the time when he entrusted you with the project, that you would not be able to and that he would join you with someone who knew how to do so that you could learn?

 

[meccanicamg]

Let's see if we can make a summary without making anyone angry.
as it happens in all companies, Mr. master orders the designer to do a job immediately, well, without wrong, which costs little and without errors.
If you are not in the office alone, always if you do not have the opportunity to change your job, you talk to colleagues (always if the boss does not exist or is the turnpillar) and you seek together a solution to the problem.
all say their idea, good or bad that they are, and the designer, if it is such, must make the decision to mix everything and make a solution come out.
If colleagues do not exist you ask on the forum that they are potential colleagues.
It is normal that each one of us knows and his different from the other and however there is always to learn and surely there are people who make us sweat because in something they are more prepared than us.... but that is where you grow.I would like to avoid reading further unnecessary controversy and sterile beatings.back to the theme of the post, you must surely have a complex knowledge of the phenomenon of transport with air.
Surely it would be well known bernoulli and fluid mechanics. It would also be useful as a countertry to use cosmos fooworks or fluent to make a cfd of what is calculated by hand.
by going to the brute you can calculate a sufficient amount of air to generate a push or a degree of vacuum that wins the weight of the carrots using the method of hydrostatic thrust through fluid vein however then becomes complicated the matter because then you can not determine exactly the losses of load and therefore the total equation of complete bernoulles is surely zoppa and you can not determine the operating point on the vacuum pump curve or fan.

a few months ago I posted a post that treats more or less the effect you need.

read more qui and you will see that the topic is relevant and you can implement it in your case.

According to my point of view, you have to have wounds from where you take the air from the environment, otherwise you don't aspire in the stern.
a collection chamber and the conduit that goes to the vacuum cleaner.

Industrial applications normally travel from 10 to 25 m/s the bodies in the pipes.

 

[Robert Tutu]

First of all I would like to thank you for the answer, I had thought of something like this: a plate that discharges into a quarry all mussels, putting the aspiration more or less to the center of the plate so that the aspiration is equated for all cavities. but I still have to understand the suction force that will be used. .of course these are only hypotheses. Then I would like to explain to you my role in the company, I practically take care of the registration and distribution drawings, as I know to use much more autocad it is difficult to imagine the mechanical pieces that are required to me...with I create work for a couple of months and are all new things for me...if the boss asks me a design I also try to do it however it is obvious that from drawing walls to pieces in plastic is a great leap (at least for me). I'm sorry for the useless discussions that they created.

 

[New Rider]

First of all I would like to thank you for the answer, I had thought of something like this: a plate that discharges into a quarry all mussels, putting the aspiration more or less to the center of the plate so that the aspiration is equated for all cavities. but I still have to understand the suction force that will be used. .of course these are only hypotheses. Then I would like to explain to you my role in the company, I practically take care of the registration and distribution drawings, as I know to use much more autocad it is difficult to imagine the mechanical pieces that are required to me...with I create work for a couple of months and are all new things for me...if the boss asks me a design I also try to do it however it is obvious that from drawing walls to pieces in plastic is a great leap (at least for me). I'm sorry for the useless discussions that they created.

Hello, but leaning on some tire supplier? Many times agents/representatives have technical backgrounds prepared on specific topics.

Hi.

 

[Robert Tutu]

at the end we solved, and the plate I drew it with the odds that the boss wanted

 

[Utente cancellato 70856]

at the end we solved, and the plate I drew it with the odds that the boss wanted

Well, on the face...
faces see some image

 

[Robert Tutu]

so much casino for a simple plate, missing only the hole for the aspiration that will be done from above (to be defined the diameter for the hole). 320 x 159 x 3.5 mm. Fortunately it was good like this and there were no strange tanks like they told me if you look well it has nothing special. this plate will be fixed to the robot flange that will bring it down every time an extraction is carried out so that it collects the straight.

 

[Utente cancellato 70856]

so much casino for a simple plate, missing only the hole for the aspiration that will be done from above (to be defined the diameter for the hole). 320 x 159 x 3.5 mm. Fortunately it was good like this and there were no strange tanks like they told me if you look well it has nothing special. this plate will be fixed to the robot flange that will bring it down every time an extraction is carried out so that it collects the straight.

all this? ? I'm gonna throw myself in the world.
But the materozzes go to the ground at home? ?
I made some videos https://www.youtube.com/playlist?list=plcoohytgsbbq74k32ewzonrrpv32mobmvI'm passionate about materozze

 

[welcome to the machine]

I only hope that neither mecanicamg nor boulders see the design ...:roflmao::roflmao::roflmao:

 

[MassiVonWeizen]

already seen... already seen.
the boss was less than making a sketch on the notebook block with the odds and in 15' he had the design, more than 10 days.
However it is a little different than that of the 1# post.
mysterious, let's throw it in tarallucci and wine that is always good and right

 

[meccanicamg]

You see I didn't understand it...anywhere between a plate with some hole and designing an aspiration system passes.
I in the professional life I have made some machines with intake and blowing it to clean, both as machines to make sockets of objects of tons with vacuum, and transport of tons of sheet at full speed and all this streaks heavily with the solution of the post above that has nothing to do with the explicit request to the first post.
I'm grounded.

 

[volaff]

In fact, I'm not questioning your skill, we'd miss it! I'm sorry that you don't understand my way of speaking but it doesn't matter, I don't use any arrogant tone on the contrary I'm very quiet, I'm wishing you to feel as I feel when I read that I don't know anything, at my house nobody shuns anyone and certainly nobody looks at the skill of the other person and judges! I only said that you are worth zero for the speeches you have made, as I do not allow me to judge anyone based on his experiences!

Hell just for a stupid plate! :

 

[New Rider]

so much casino for a simple plate, missing only the hole for the aspiration that will be done from above (to be defined the diameter for the hole). 320 x 159 x 3.5 mm. Fortunately it was good like this and there were no strange tanks like they told me if you look well it has nothing special. this plate will be fixed to the robot flange that will bring it down every time an extraction is carried out so that it collects the straight.

laser>pressa fold and now I imagine. . .

 

[Robert Tutu]

In fact in the first post I had written the request that they had made me, then they changed their mind and told me to realize that plate it is not my fault if they change my mind 100 times I try to do what I can if then you want to help me without taking my ass well if not as I said you do not respond that you do first.