import stp or create new together with shaded display style with edges

[reggio]

hello, when amounting one step or another format in sw or
when on one side or by a subaxieme I create a set,
the result I see in the new together is always
with display style=>shaded (without edges)
I would always prefer it with display=>shaded style with edges, by default, is it possible?

 

[MassiVonWeizen]

could depend on solids that optimizes graphics to improve performance.
or is a template setting that you use

 

[meccanicamg]

If all the fatigues would be in a click...solidworks does it because the graphics card should not go crazy x a step.

 

[reggio]

.... mah, today I imported a step that eventually became a set of 41,000 parts (including balloons), I do not think that after all that fatigue, it is an extra clik, that does not weigh, can "heave" ... of the made series 41.000 we also make 41.001 :d
jokes aside, ending the import with or without edges the model moves identically, only that with the edges I can understand, without edges is a useless cluster of colored shadows ...

anyway, thanks for the support :d

 

[meccanicamg]

on the fact that without edges you do not understand how shape has the body I give you fully right.
However, there should be a setting somewhere to set because that I remember in the 2004 version did not disappear the edges. or what do I remember wrong? ! !

 

[MassiVonWeizen]

options of axiemi>do not show rln edges in hidden mode http://help.solidworks.com/2017/ita...embly.htm?id=95e0f73785f24a0cbe6b74964809fd07

 

[reggio]

options of axiemi>do not show rln edges in hidden modehttp://help.solidworks.com/2017/ita...embly.htm?id=95e0f73785f24a0cbe6b74964809fd07

hi, I took off the check but nothing changes
Maybe you need a reboot sw or PC? I'll try...

 

[reggio]

... nothing, there is no bit, even rebooting sw the situation does not vary
I'll keep it that way... thank you anyway!