• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

improvised closing autocad 2011 after a few seconds from start

  • Thread starter Thread starter fuser1982
  • Start date Start date

fuser1982

Guest
Hello everyone!!! I have a problem with my 2011 32 autocad, when I go to start it after a few seconds it closes automatically, I tried to uninstall it and reinstall it but nothing fact, it always gives me the same problem. Does anyone know what it can depend on?
 
fuser1982 said:
Hello everyone!!! I have a problem with my 2011 32 autocad, when I go to start it after a few seconds it closes automatically, I tried to uninstall it and reinstall it but nothing fact, it always gives me the same problem. Does anyone know what it can depend on?
Click to expand...
by a million factors!!! Maybe you should contact your dealer first. . .
 
 
PlannerRoad said:
see these cases:
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteid=123112&id=15832414&linkid=9240617
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteid=123112&id=15832507&linkid=9240617
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteid=123112&id=14946272&linkid=9240617
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteid=123112&id=15871267&linkid=9240617
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteid=123112&id=15176093&linkid=9240617also read this for removal of files that remain after uninstallation:
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteid=123112&id=2887771&linkid=9240617
Click to expand...
I tried all the suggested solutions but, after an intense night and day of attempts, the result was always the same. I erased and rinse everything possible and imaginable but nothing done. I don't think it could be a license-related problem because ptima was working properly, the problems appeared when I had to replace the motherboard to the computer.
 
fuser1982 said:
I tried all the suggested solutions but, after an intense night and day of attempts, the result was always the same. I erased and rinse everything possible and imaginable but nothing done. I don't think it could be a license-related problem because ptima was working properly, the problems appeared when I had to replace the motherboard to the computer.
Click to expand...
tried to update graphics card drivers?
 
stefanobruno said:
inventor behaves like this when he doesn't find excel.
Maybe even autocad.

Bye.
Click to expand...
impossible, because I have the same identical programs as before.
the installed version is educational, so how do I contact the dealer, if I picked it directly from the autodesk site?
 
fuser1982 said:
the installed version is educational, so how do I contact the dealer, if I picked it directly from the autodesk site?
Click to expand...
kind fuser,
if you have the titles (as a teacher, I presume) to download nothing less than autocad 2011 educational from the autodesk site, then you will have no problem getting a new activation code from autodesk itself.

I think the old code was "complete" to the old motherboard, but no longer (justly) to the new one: you have to contact autodesk in any way, explaining to him how things are without reticencies.

in my modest opinion, having uninstalled autocad has worsened things: before it should have exported the license by ltu.exe, and only after it should have been uninstalled. . .

:
 
fuser1982 said:
impossible, because I have the same identical programs as before.
the installed version is educational, so how do I contact the dealer, if I picked it directly from the autodesk site?
Click to expand...
Forgive me, where did you download the educational version? It's not like we're talking about a version.
 
quiet, tristan: let us 'u prufessuri ing.arch.fuser is appropriately justified.

I'm just saying, egregio prof, that in this noble forum there are no people with the ring to the nose or the alarm to the neck, so be honest. without if and without...

:)
 
CADlandiano said:
kind fuser,
if you have the titles (as a teacher, I presume) to download nothing less than autocad 2011 educational from the autodesk site, then you will have no problem getting a new activation code from autodesk itself.

I think the old code was "complete" to the old motherboard, but no longer (justly) to the new one: you have to contact autodesk in any way, explaining to him how things are without reticencies.

in my modest opinion, having uninstalled autocad has worsened things: before it should have exported the license by ltu.exe, and only after it should have been uninstalled. . .

:
Click to expand...
Tristan said:
Forgive me, where did you download the educational version? It's not like we're talking about a version.
Click to expand...
CADlandiano said:
quiet, tristan: let us 'u prufessuri ing.arch.fuser is appropriately justified.

I'm just saying, egregio prof, that in this noble forum there are no people with the ring to the nose or the alarm to the neck, so be honest. without if and without...

:)
Click to expand...
We put the dots on the i.instead of doing so much sborons, and making out about the origin of the version and what else said in previous posts, you should know that the autodesk did a Convention with different Italian universities and educational institutions so that both students and teachers can use these software for educational purposes.

closed this parentheses, I wanted to communicate that the problem was related to the motherboard in fact, after having ascertained that the incomod was not due to harware incompatibility, I contacted who of duty and provided to assign a new License
 
fuser1982 said:
We put the dots on the i.instead of doing so much sborons, and making out about the origin of the version and what else said in previous posts, you should know that the autodesk did a Convention with different Italian universities and educational institutions so that both students and teachers can use these software for educational purposes.
Click to expand...
Good boy! I know very well, but you didn't answer my question anyway! for your info Italy has a retailer of edu products (small n.d.a.) and for any problem you can address to them, if the problem is related to educational versions. I don't make the cum, and always for your info I've been working in the channel for many years.
fuser1982 said:
closed this parentheses, I wanted to communicate that the problem was related to the motherboard in fact, after having ascertained that the incomod was not due to harware incompatibility, I contacted who of duty and provided to assign a new License
Click to expand...
So what? you changed the motherboard and everything worked out? Good for you
 
fuser1982 said:
the problem was tied to the motherboard ... I contacted who of duty and provided to assign a new License
Click to expand...
..that is, just as suggested by this 'short' this morning at 7:35 (second paragraph).

instead of insulting, he would have made better figure thank you who lost 3 minutes of his existence, trying to help her. . .

:36_1_10:
 
PlannerRoad said:
not from any error code?
Click to expand...
Hello I am new to the forum I found you because I searched on google how to solve the problem that the author of the topic....
I have the same problem but with autocad 2012 32bit the program starts for a few seconds and then disappears .... to make you understand better I created a gif to show you:
autocad2012error.gif
I found an error log file in the files that says:
HTML: 
errore irreversibile:  unhandled access violation reading 0x0020 exception at 128b9f3h

01/05/2012 at 13:58:44.513  disegno: 
-------------
but it probably created because I used the autocad program to restore default settings to help me! !
thanks in advance :smile:
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 0 (members: 0, guests: 0)
Back
Top