• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

master in mechanical engineering working

Riprendere l'università?

  • Si

  • No

Results are only viewable after voting.

mattmecc

Guest
Hello, everyone.
I introduce myself, I am matteo, I am 25 years old and I have recently enrolled at the site. I often consulted him for design advice, and I saw that the community is quite alive.

I am here with this discussion to ask you for advice, often treated here on the forum. I believe that the Commission should be able to take the necessary steps to ensure that the Commission is able to take the necessary measures.

about 3 years ago I graduated in aerospace engineering and just before I found work as a full-time mechanical designer.
my idea was to continue with the master in mechanics, but the work took over, since the 8 hours were often 10 or 12 hours of work.
Now, having changed work, I find myself having more defined hours, so I would like to start studying again, always as a working student.

I wonder if, however, it makes sense to achieve the mastery and therefore the skill to the profession, since I still have 2 objectives: to open a design studio in its own and to open a company of job-seekers.
I'm more afraid of the time I'm going to take her, since it will be a minimum of 4 years of sleepless nights and wakes up at dawn.

I thank you for your willingness to help me and answer this question of mine that has long attracted me.

Good day to all.
 
Hello, matteo, I express my view.
Since you already have a degree of weight and considering your future goals, if you are really determined, I would let you lose further studies and start facing the world of work following your aspirations.
As you move forward, you will notice that you have gaps on certain topics and only in that case you will see if you fill them with specific courses of study.
remember that the two types of preferential activity you have indicated both require strong determination and spirit of sacrifice; both in one case that in the other I would recommend you to work again at the dependencies of some already established company then, between two or three years and a little more experience you will be easier to choose your way.
Good luck.
 
In fact, I also believe that the start of an entrepreneurial activity is incompatible with the evening or night study, risk of hurting both.

If you really feel useful the magisterium should hurry now that you are addicted. In the future, if you have a family and/or an autonomous activity, free time will be reduced to lumicino and it will be really unlikely to find time to study.

for the design study for my experience to customers absolutely does not matter the title of study, but more 'the wording or the "brochure" of the works done, even less I believe for a possible company of mechanical processing. this because in 99% of the design business the skills required are those of the graduate technician or little more.

If you want to have in the future the chance to sign projects that the qualification might be interesting to have the master's.
 
Matteo, I'd like to give you some indications.
with regard to the opening of a technical study I refer you to the many posts present in this forum edited by those who already carry out this type of activity in their own; You'll get an idea.
for the processing of third parties you have not expressed the type or mode for which I cannot express myself.
I can tell you that in the mechanical industry there is a strong demand and is increasing, of graduates to technical address to cover positions in various sectors such as design, technical service, production, purchases, logistics, quality, sales, as well as many other innovative positions in which your profile could find placement. from here, according to your skills you can express all yourself with possibility of professional growth.
 
if you want to continue working in “cold” design and design, the university rarely teaches you more than work practice. . So I'd tell you to keep working.
different speech would be if you were interested in expanding your theoretical knowledge in other areas.. Usually, the mastery is seen much more in detail the dynamics of systems, the mechanics of vibrations, the fluid dynamics, the numerical methods like the fem... if you are not interested in working in these fields, at practical time the master will never serve you.

As for the bureaucratic advantage of enrolling in the engineers’ lobby, I can’t help you. I don't know the differences.
 
Thank you very much to all, you are giving me various ideas that I had not considered.
hunterI agree. I'd do it now. The doubt that I would be is that I did not regret my choice in the years to come. As for what a customer is looking for, you reassured me!
tetrastore, thanks for the analysis you gave me. It is always useful to have an idea of the market situation in which we are working. with mechanical manufacturing company c/terzi, I meant a company with lathes and cnc centers and why not, also 3d printers. However, this idea comes from pure passion, it is still not well reasoned about feasibility.
Stan9411, let's say you've hit the core of the matter. at the three-year, I had a fem analysis flourish choosing a special course in which we used straus7. we say that I am interested in the "cold" design, but I would like to have autonomy regarding the dimensions. after all what distinguishes a designer from a designer, in my opinion.
 
Forget the master, I don't say it doesn't serve (in some niche fields it takes a lot) but for what I think you understand you have in mind, I would invest time to learn the knowledge that comes from the world of work, more practical knowledge and network of contacts.
I know the world of third parties, there are companies that go from the "cantinaro" (with all due respect to those who work and work) that produces very simple and small pieces to very structured companies with plants from millions of euros that in many cases hold much of the know-how they think they have customers (but they no longer have because they have moved on external suppliers all the production). and I talk about customers with prestigious names internationally.
this just to tell you that if you want to enter seriously in the world of tertists you need to have at your disposal a mountain of money, otherwise believe me it is better to think about doing the employee.
 
If you can study it.
Then you will be rewarded by the immense deck that you will do if you study by working.
However, a good computer engineer is not said to be a good designer.
Bye.
 
my personal opinion: If you are not going to work in some company where engineers really do engineers, and I think I understand that this is not your aspiration, put aside the master and concentrate on filling the various gaps that occur in your working path.
 
Wintel said:
my personal opinion: If you're not going to work in some company where engineers really do engineers, and I think I understand that's not your aspiration, put aside the magisterium
Click to expand...
is a bit strong... but he sees me. having the ambition to open a company that does mechanical processing, has little to do with taking a master’s degree. . to make drawings and models from customers and to make go lathes and cutters it only takes so much work practice. I see him do it effectively by people who have only graduation. .
mattmecc said:
after all what distinguishes a designer from a designer, in my opinion.
Click to expand...
for what I have lived, the three-year period is already well or bad all the measurements and verifications according to the norm of the main standard components (albers, toothed wheels, bolted links, wrenches, welds etc.). to the master give you the basic knowledge to go research and development on something not standard ... but if you want to do third-party processing, I don't think you will need much..
 
It is correct: I would not like to go to a r&d department, rather I always liked to follow the production.

in any case, if you choose to follow the other idea, or that of the design studio, are you required "magistrali" skills? intended with design study, not a study with fem analysis, but of design and optimization of the product, both in terms of design for assembly and economic (this is a bit the idea I have, but still I have not done research on feasibility and market, so it may be that it is an imaginative idea)
 
@mattmecc If that's your goal, I'd honestly let you lose as others have already told you: does not bring you great added value. Do workshop practice to machine tools, am and mounts, it is essential for what you want to do.
If you want to take the lm for personal satisfaction... well there is, it is esteemable and definitely enriches you, even because one tomorrow you never know what you can do. but it's another speech. . .
 
mattmecc said:
Hello, everyone.
I introduce myself, I am matteo, I am 25 years old and I have recently enrolled at the site. I often consulted him for design advice, and I saw that the community is quite alive.

I am here with this discussion to ask you for advice, often treated here on the forum. I believe that the Commission should be able to take the necessary steps to ensure that the Commission is able to take the necessary measures.

about 3 years ago I graduated in aerospace engineering and just before I found work as a full-time mechanical designer.
my idea was to continue with the master in mechanics, but the work took over, since the 8 hours were often 10 or 12 hours of work.
Now, having changed work, I find myself having more defined hours, so I would like to start studying again, always as a working student.

I wonder if, however, it makes sense to achieve the mastery and therefore the skill to the profession, since I still have 2 objectives: to open a design studio in its own and to open a company of job-seekers.
I'm more afraid of the time I'm going to take her, since it will be a minimum of 4 years of sleepless nights and wakes up at dawn.

I thank you for your willingness to help me and answer this question of mine that has long attracted me.

Good day to all.
Click to expand...
Wow, you want to open a design studio and a third-party processing company... your days must be 48 hours minimum;)
 
I would advise you to continue with the magisterium only because one tomorrow will surely have the remorse for not even trying.
Maybe you won't need anything for your profession but the remorse will still be present.
 
If you like to study and you can let it continue, but do it now! If you don't, then you'll just have to move!
 
matteo, even now that you have different opinions the choice will not be easier, surely however they will have contributed to enlarge your vision.
Regardless of the choices you make, I think you should always keep three fixed points:Umiltà; to be taught anything from those who have more experience, curiosity to always learn new things and deepen what you already know and l'entusiasmo not to stop at the first obstacle.
with these three comrades, who already assist you, I think you will have no problem in your professional path.
Good luck.
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 0 (members: 0, guests: 0)
Back
Top