• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

nx 7.5 per linux ?

  • Thread starter Thread starter mariocad
  • Start date Start date

mariocad

Guest
Good morning. If I understood the messages I read here, the nx price ranges from $130 of a student version to €20,000 of a commercial version.

Does anyone have any idea how much linux could cost, at least roughly?
 
mariocad said:
Good morning. If I understood the messages I read here, the nx price ranges from $130 of a student version to €20,000 of a commercial version.

Does anyone have any idea how much linux could cost, at least roughly?
Click to expand...
I do not believe that prices vary based on the platform but only according to the bundle you want to buy, however it is certainly not open source:smile:

I've seen that you've written "recommend me" in signature under "software", I can tell you that if you go on nx you're not sure wrong.
 
axa said:
I don't think prices vary according to the platform

I've seen that you've written "recommend me" in signature under "software", I can tell you that if you go on nx you're not sure wrong.
Click to expand...
Of course, but I have a limited budget. in another thread they advised me to look at alibre and spaceclaim, and I am making a little thoughts.

But I remember that it has already happened in the past, if I do not go home unigraphics, that the linux version of a cad program had a lower price than the corresponding windows version. and therefore before discarding this option a priori, I would like certain news about the cost of nx 7.5 for linux...
 
mariocad said:
Where is the price? and just after clicking there, I posted the message! :-)
Click to expand...
the prices of these products you will never find them on a website. You have to make an offer, make a negotiation, etc., or ask some users who already bought it.
I've never understood why fiat lists are public and cad lists are kept in knox fort crates, but that's how it works.

I think the basic nx module costs about 10,000, but the risk of saying something unexpected is very strong. . .
 
cacciatorino said:
the prices of these products you will never find them on a website. You have to make an offer, make a negotiation, etc., or ask some users who already bought it.
I've never understood why fiat lists are public and cad lists are kept in knox fort crates, but that's how it works.

I think the basic nx module costs about 10,000, but the risk of saying something unexpected is very strong. . .
Click to expand...
Yes, in fact it is exactly what I wrote in my presentation messages, and precisely that the reason (clear prices published on the web and transparent purchasing mode) for which at the moment my choice is restricted to inventor lt (purchase on misco, eprice ,etc.) and alibre (the price of which is published on the dealer sites).

However, in the end some wellinformed has "confessed" the prices of solidedge, solidworks, pro/e; I was hoping to post here, to succeed in discovering I do not say the exact price of nx/linux, but at least know if it is in the price range of inventor lt / alibre or that of solidedge/solidworks and beautiful company... .

certain news though, not suppositions. . .
 
cacciatorino said:
the prices of these products you will never find them on a website. You have to make an offer, make a negotiation, etc., or ask some users who already bought it.
I've never understood why fiat lists are public and cad lists are kept in knox fort crates, but that's how it works.

I think the basic nx module costs about 10,000, but the risk of saying something unexpected is very strong. . .
Click to expand...
to me they told about 18,000 the basic module a short time ago that I was contacted by a dealer.
 
mariocad said:
Yes, in fact it is exactly what I wrote in my presentation messages, and precisely that the reason (clear prices published on the web and transparent purchasing mode) for which at the moment my choice is restricted to inventor lt (purchase on misco, eprice ,etc.) and alibre (the price of which is published on the dealer sites).

However, in the end some wellinformed has "confessed" the prices of solidedge, solidworks, pro/e; I was hoping to post here, to succeed in discovering I do not say the exact price of nx/linux, but at least know if it is in the price range of inventor lt / alibre or that of solidedge/solidworks and beautiful company... .

certain news though, not suppositions. . .
Click to expand...
if your budget is for autocad lt or alibre let it miss nx...
 
cacciatorino said:
the prices of these products you will never find them on a website. You have to make an offer, make a negotiation, etc., or ask some users who already bought it.
I've never understood why fiat lists are public and cad lists are kept in knox fort crates, but that's how it works.

I think the basic nx module costs about 10,000, but the risk of saying something unexpected is very strong. . .
Click to expand...
from what I remember, you start from less than 10k, and anyway with the "base module", you can really do a lot.
 
I thank all for the answers, which is what I expected ("forgot nx")
but are we sure that the linux version has the same price order as that windows?
 
mariocad said:
I thank all for the answers, which is what I expected ("forgot nx")
but are we sure that the linux version has the same price order as that windows?
Click to expand...
It is not that you have to forget it, even if I think it is not that x linux version the order of magnitude can change, the software is what I believe it is also price.
You could still follow the matrix board and feel team3d, I don't think they get paid to make you a quote.
 
list prices range from 9,000 (8.770 for accuracy) to 24.460 euros (more spent on special things e.g.advanced simulation 40,000 and passes). as axa says with the 'base' version you already do a lot of things.
there are then to be taken into consideration the canons of maintenance, training, pc etc. etc.
Informing yourself costs nothing if you have special questions send me an mp.
Hi.
 
ceschi1959 said:
list prices range from 9,000 (8.770 for accuracy) to 24.460 euros (more spent on special things e.g.advanced simulation 40,000 and passes). as axa says with the 'base' version you already do a lot of things.
there are then to be taken into consideration the canons of maintenance, training, pc etc. etc.
Informing yourself costs nothing if you have special questions send me an mp.
Hi.
Click to expand...
thanks for the availability, but at this point I would say that the order of magnitude is definitely outside of my reach even only for the basic version.

removed this doubt, I will fill up on the cheap entry-level software that had been recommended to me immediately; you will read me about the threads dedicated to them.

Thanks again.
 
nx is worth all the money they ask... is the top of the top set in catia v5... but personally I prefer it 1000 times a catia is much more versatile and fast... .

the top ... all the rest ... from that cube of rubrik of pro/e to the superbaggato solidworks up to the various codes-porcai type inventor, spacequa', solid-là etc... They wouldn't even deserve to be produced or marketed!

:tongue: what bad they are!!!:biggrin:
 
SER.CAD said:
nx is worth all the money they ask... is the top of the top set in catia v5... but personally I prefer it 1000 times a catia is much more versatile and fast... .

the top ... all the rest ... from that cube of rubrik of pro/e to superbaggato solidworks to the various codes-porcai inventor, spacequa', solid-là etc... They wouldn't even deserve to be produced or marketed!

:tongue: what bad they are!!!:biggrin:
Click to expand...
You deserve the invitation to talk to a user meeting! :tongue:
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 0 (members: 0, guests: 0)
Back
Top