cacciatorino
Guest
Greetings from me, especially to my fellow citizen! :smile:
ssamone
Guest
Hello everyone, my name is simone, I live in the province of weighing and, despite not really a kid, so far I have never dealt with design. Unemployed since this summer, I started studying autocad by self-taught (mainly 2d) because I like the scope of design and why I think it can be useful to have new work outlets. in this regard I wanted to ask you experts: Do you know someone or some school of training valid and qualified in weighing or ancone provinces that hold solid edge courses, perhaps not excessively expensive?
I hope I haven't abused the forum for "personal reasons", in case I apologize, as I told you I am a newbie. . .
I hope I haven't abused the forum for "personal reasons", in case I apologize, as I told you I am a newbie. . .
Francesco Gatto
Guest
hi to all my name is francesco and I write from the beautiful port empedocle (sicilia). Thank you for allowing me to be part of this forum. I hope that our experiences can be mutual help.
SE-Bologna
Guest
ops, maybe I had to introduce myself. Actually I'm not new to this forum, it's just that the time to post is never there.
I am Franciscan and work in bologna and surroundings as a consultant for about 12 years.
the current sector is the electromedical one but I also had experience in automotives, food machines, domotics and other.
I started with cadkey (who remembers it?) and for about 10 years I use solid edge.
Hello, everyone.
I am Franciscan and work in bologna and surroundings as a consultant for about 12 years.
the current sector is the electromedical one but I also had experience in automotives, food machines, domotics and other.
I started with cadkey (who remembers it?) and for about 10 years I use solid edge.
Hello, everyone.
Robiert
Guest
hello to all are of the Veneto and thanks to being part of the forum I hope to be of help.. If we see!
Santiago
Guest
Hi, this is me! thank you for welcoming me in the forum
marsigiu
Guest
Hello everyone.. .
I'm em... I'm Apulian, but I study engineering at Ferraara.
I'm em... I'm Apulian, but I study engineering at Ferraara.
radio
Guest
Welcome to the family.
Giulio Bernardini
Guest
Hello to all:smile:
My name is Giulio, I come from the province of bologna and I am a student of mechanical engineering at the alma mater. for some time I have decided to revel in 3d modeling with solid edge, mainly by self-taught as my university course treats far too superficial of this program during industrial design. I've been following your visitor's community for a long time, and today I decided to sign up:
Say hi!
My name is Giulio, I come from the province of bologna and I am a student of mechanical engineering at the alma mater. for some time I have decided to revel in 3d modeling with solid edge, mainly by self-taught as my university course treats far too superficial of this program during industrial design. I've been following your visitor's community for a long time, and today I decided to sign up:
Say hi!
marcolino01
Guest
Okay, girl. I've been in the forum for a while, but only now I'm here.
My name is rotten and I live in Adriatic alba - abruzzo. My company decided to put me in cash integration and, having much more time, I am learning to use solid edge thanks also to a friend who works on us daily. I hope you give me your help in case you need... .
greetings
My name is rotten and I live in Adriatic alba - abruzzo. My company decided to put me in cash integration and, having much more time, I am learning to use solid edge thanks also to a friend who works on us daily. I hope you give me your help in case you need... .
greetings
Tequila
Guest
welcome to all the latest members... if you need just ask, specify version of solid edge and license (academy or commercial) and I recommend you first use the "research" function to find any messages similar to your requests, for the rest we are here. :smile:
FanteCavalloRe
Guest
Greetings to everyone.
we are a group of colleagues working in a technical office that for a few months has adopted solidedge st3 as the main cad for the design of molds for the processing of thin sheets.
Although our experience is based on solid design bases 2d and 3d, matured in years of intense work (mainly with gbg then thinkdesign), we realized that to cad new correspond new problems and solutions, and that not always personal experience allows us to put a piece (and sometimes even technical assistance).
and so here we are, in a forum that has long been intriguing us and which is often a source of valuable information, ready to confront the community about the vast world of solidedge.
we are a group of colleagues working in a technical office that for a few months has adopted solidedge st3 as the main cad for the design of molds for the processing of thin sheets.
Although our experience is based on solid design bases 2d and 3d, matured in years of intense work (mainly with gbg then thinkdesign), we realized that to cad new correspond new problems and solutions, and that not always personal experience allows us to put a piece (and sometimes even technical assistance).
and so here we are, in a forum that has long been intriguing us and which is often a source of valuable information, ready to confront the community about the vast world of solidedge.
Musical76
Guest
Bye to all,
I'm gabriel. live and work in the province of modena.
despite the young age I started from autocad like everyone, who more than anyone, but from version 2.5 if I don't remember badly
I worked with pro-e, nx, I saw catia. Now I work with solid edge.
I have always been interested in designing plastics from the biomedical sector, to the automotive.. and currently working as a designer at a company that produces sensors for automation.
For those who need it, my brother is carrying out a small biomedical laboratory. we can make design and assembly.
we can help you at any stage of the product, you find yourself. in development, or in production/production.
available
greetings
I'm gabriel. live and work in the province of modena.
despite the young age I started from autocad like everyone, who more than anyone, but from version 2.5 if I don't remember badly
I worked with pro-e, nx, I saw catia. Now I work with solid edge.
I have always been interested in designing plastics from the biomedical sector, to the automotive.. and currently working as a designer at a company that produces sensors for automation.
For those who need it, my brother is carrying out a small biomedical laboratory. we can make design and assembly.
we can help you at any stage of the product, you find yourself. in development, or in production/production.
available
greetings
Inocente
Guest
I am responsible for the design and design of carpentry in general (of all)! nos vemos en los foros!
L'abbartatore
Guest
hello to all
My name is gianni I'm a pordenone designer.
Until now I have worked in three different companies, in a company consulting firm, in an injection mould production company for plastics and in a light carpentry company that produces stainless steel parts for the catering industry.
Today I work in a company that produces machines wash floors and sweepers for interiors\esterni.
I use solid edge st3 even if until the precent work experience I have always used autocad (I have passed in front of almost all versions from '97 to 2010) occasionally for some modification to the company's historical archive. for a short period for the design of injection molds I took by hand toptron 9.0.
My name is gianni I'm a pordenone designer.
Until now I have worked in three different companies, in a company consulting firm, in an injection mould production company for plastics and in a light carpentry company that produces stainless steel parts for the catering industry.
Today I work in a company that produces machines wash floors and sweepers for interiors\esterni.
I use solid edge st3 even if until the precent work experience I have always used autocad (I have passed in front of almost all versions from '97 to 2010) occasionally for some modification to the company's historical archive. for a short period for the design of injection molds I took by hand toptron 9.0.
looksin87
Guest
Bye to all,
I am a student-worker at the first experiences in the field of design 3d.Work as aspiring designer at a company that deals with molds and presses for the reconstruction of the tire.use solid edge st3.I am happy to be part of your forum.
Hello everyone
I am a student-worker at the first experiences in the field of design 3d.Work as aspiring designer at a company that deals with molds and presses for the reconstruction of the tire.use solid edge st3.I am happy to be part of your forum.
Hello everyone
zed1976
Guest
hello to all...I call me fabrizio and I do programming software / database management in a mechanical company in the alessandrino.
I have already used this beautiful forum to find useful information for solid edge.
in fact now in the company we can create parametrized designs automatically thanks to basic viseal controls.
Thanks again!!!
I have already used this beautiful forum to find useful information for solid edge.
in fact now in the company we can create parametrized designs automatically thanks to basic viseal controls.
Thanks again!!!
Marco BOSELLO
Guest
Hi.
I'm rotten.
I am mechanical expert, and I live in the delta area of the po.
I worked 14 years in the technical office and now I decided to become independent. . .
I used various software including autocad, visicad, mechanical desktop, inventor, but now stably solid edge st3. I mainly deal with medium-light carpentry.
Bye, Marco.
I'm rotten.
I am mechanical expert, and I live in the delta area of the po.
I worked 14 years in the technical office and now I decided to become independent. . .
I used various software including autocad, visicad, mechanical desktop, inventor, but now stably solid edge st3. I mainly deal with medium-light carpentry.
Bye, Marco.
Zacca
Guest
hello to all,
I handle precision mechanics, automotive industry, currently use solid edge 20 st2.
richer
I handle precision mechanics, automotive industry, currently use solid edge 20 st2.
richer
andrea.nitti
Guest
I introduce myself, I am a master university student, I attend the first year engineering course, I had experience with autocad programs, ansys (limited) and solid edge (I am at first arms). I hope you can help me and share with me some of your experience. Greetings to everyone!