problem with feritoia

[Emergent]

Nothing.
I tried again but I don't go out.

 

[MassiVonWeizen]

you did a joint wound, then you suspended the fitting function.

I didn't do it. I used one of those in solid libraries
you should find them in c:\programdata\solidworks\solidworks 2xxx\design library\forming tools\louvers

However the suspension of the connection is equivalent to not having the connection. I could have deleted it.

 

[Emergent]

I can't solve the problem.
If I suspect or delete the connection (in a tool created by me, not by default) I get the error message.
besides this I can not change the wounder already present in the library.
I can change the height, but I want the depth to be lower than the height.

 

[Emergent]

I'm slowly coming over.
doing the right configuration I managed to set the measures I need and make the wound without fitting.
But there are still problems.
as you can see the forming tool is wide 200 and high 20.
However, by checking in the model these odds do not return and increase both.
I guess it's not normal for this to happen.
What could I be wrong?
other thing is the depth of the wound.
It seems that the depth is blocked and cannot change it.
I need a 20- and 14- deep wound.

 

[Emergent]

If, on the other hand, I do the wound with the fitting, the odds of the instrument and those that I find at the table are identical.

 

[Emergent]

This is the instrument of formation that I created, but precisely, if I suspect the fitting gives me problems.
If I don't suspect it's all right.