project library: custom drilling + fittings.

[graziano-g]

hi, I need to apply fittings and drilling on fixing plates of different sizes in a repetitive way.

I then generated the library file that you find attached.

to be used will be downloaded, extracted then added to the folder below the path or, after generating a custom folder in the project library, will be inserted into it to keep it separated from the libraries installed with sw.
but you already know that.

c:\programdata\solidworks\solidworks 2015\design library\features\metrico\serie di fori

function works, even if I think there is an initial anomaly (at the insertion of the function to me appears the preview of 5 holes in place of the 4 that will then be practiced on the piece ) and a final error message appears that however if ignored not by problems ( I do not understand where the hippo is.... ).

the preview of the result appears only after selecting any of the values shown in the column value under identifying odds even without changing the value.

I would then change the description that appears in the column name under identifying qualities from thur hole to hole depth and from thur hole diam to hole diameter, I tried but sw makes me a mistake that I can't eliminate, probably the solution is too simple... .

Does anyone want to examine the file?

n.b.
opening it is noticeable that the insert bar excludes the racking function.
if you move the bar at the end, when applying the function to a piece, you lose in the monitor the ignition of the entities that drive to the exact sequence of the selection. So I prefer to leave her where she is.

Hello, thank you.

 

[MassiVonWeizen]

question 1:
Why do a 3d sketch?
question2: What are those demands of edge that you have to select when entering the function? which edges should be selected?
answer for the description holes: just enter the sketch2 change of the guided drill, select the quota and change its name in the property manager

 

[MassiVonWeizen]

The edges came to us after they needed ray. It always gave me error because, unlike the reference edges of the holes, I did not see previews and did not make the right sequence.
bringing the range of the library part to 5 did not appear to me any error. Why did you put that 0.001 value on the radius?

 

[graziano-g]

Hello, answers:
1 - I don't need it, I'm wrong with the procedure.
2 - You came to us. Sorry, I didn't explain
Description holes - I came in sketch modification but I select and changed the name from the quota allocation window. according to your directions I solved.
radius: if I do not insert that value then it does not show in the library insert monitor the sequence of geometries (spligs) to be selected.
that value is so small that in case it is not modified then in processing it is not interpreted, for example by laser cutting.
thanks for the directions.
Hi.

 

[teseo]

hi you can post the correct library function thanks hi

 

[graziano-g]

Hey, sure, when I get back.https://www.google.it/url?sa=t&sour...bmal6bagieag&usg=aovvaw0grz6zlivippguoppcbsde

 

[graziano-g]

Hello, as far as the correct library is concerned... the error continues to give it to me.
I updated the name of the fields on which I want to intervene and I made the creation wizard holes starting from the face and not from the 3d sketch, the result does not change.
updates are simple, massive has given some indications and I some explanations, the update is within reach of anyone.
Bye.

 

[MassiVonWeizen]

I tried to remake from scratch the function of lbreria and does not give me errors; even if at the time of insertion in a part do not fulfill the names of the edges as in your
I'll coach you, maybe you have a light.

 

[graziano-g]

Hello, honored, thank you.
I see I can succeed tomorrow, now I'm a little caught.
Hi.