quotation zigrinating

[Gstud]

Hi, I wonder how I can quote this kind of zigrination.

 

[biz]

for the zigrination you must refer to the uni 149.
I see nothing here.

 

[MassiVonWeizen]

those are the signs of a turning made of disgust; The only thing you can get from such processing is to ruin the tool.@gstud try to give feedback to your discussion, do not do as in the other from which you disappeared

 

[Cadinpiedi]

the image clearly shows that it is a flange with calibrated orifice. the sealing surface is not turned badly is made in order to ensure the seal by affecting the relatively soft seals used in the chemical field, it is called phonographic strip and is defined with the values below:

 

[MassiVonWeizen]

the image clearly shows that it is a flange with calibrated orifice. the sealing surface is not turned badly is made in order to ensure the seal by affecting the relatively soft seals used in the chemical field, it is called phonographic strip and is defined with the values below:

@ cadinpiedi, thanks for the explanation. I make amends and apologize to the flange performer.

 

[biz]

I couldn't understand if it turned wrong or if it was a workmanship.

 

[Gstud]

Thanks for the answers, I initially thought about the zigrination but I was not completely certain because in the uni149 it does not refer to this type of processing. I would have made a mistake.
then proceed with a section and I go to quote the angle and step as shown in the image.