quotatura

[madmax78]

good evening to all, I find myself to quote a particular, and I find that listing a threaded hole gives me the diameter and not the thread. Do I have to set up a set? and the gas thread? do I have to set on the .dat file?

Thank you.

 

[IPdesign]

I continue to read your requests but I have not read your presentation in the appropriate area .
be clear, you don't have to do it, but it would be welcome to all

 

[madmax78]

You're right.
I did some evidence about the quotation of a threaded hole, but nothing to do. recognizes the diameter but not that it is a threaded hole. I can only change the symbol with the letter m. but there is no way to automatically recognize it?

 

[IPdesign]

the automatic recognition there would be,
in drafting insert -> parameters feature -> select the feature of the filettaura
select the view where to put the quota and he automatically puts the m.
But I find it too complicated.
I created a macro that automates the suffix m and at the end of the reset command the ø

 

[IP_design]

as you can see I have inserted a button in the quotation bar that reminds you of the macro that I attach to you.

try and then let me know:biggrin:

 

[madmax78]

thanks 1000 ip.
I tried but it gives me the mistake you see in the attached image.
I also tried to make non-mechanical holes, and I expected a different letter, instead of always with the m, or with the diameter. I'm trying to edit the standard threaded hole file, but I don't understand which parameter you use. This is because I am creating gas thread, because normally we use that in our drawings and in the quota the gas or g

 

[IPdesign]

thanks 1000 ip.
I tried but it gives me the mistake you see in the attached image.
I also tried to make non-mechanical holes, and I expected a different letter, instead of always with the m, or with the diameter. I'm trying to edit the standard threaded hole file, but I don't understand which parameter you use. This is because I am creating gas thread, because normally we use that in our drawings and in the quota the gas or g

I've given up on gas quotas, I'm going by hand with the force of the text.

for the macro I am sorry, probably my defauts differ too much from yours, I give an eye and maybe I send it back to you

 

[IP_design]

try again with this, I slightly modified

Let me know.

 

[lostico]

I attach my modest contribution to the cause, the icon for the quotation of threads made by me.

for ip:
known with pleasure that you can still register macro in nx6.
time ago they told me that soon, it would not have been possible to do so, so not to get used to me too much.
at the end of December we will leave the 4 to pass also us to the 6, then general repass of all macros:finger: and then via recorder:smile:we can also create a special section on the forum where we share the macros of general use, all good or bad we have... I have many nx4 for example

 

[IPdesign]

I attach my modest contribution to the cause, the icon for the quotation of threads made by me.

for ip:
known with pleasure that you can still register macro in nx6.
time ago they told me that soon, it would not have been possible to do so, so not to get used to me too much.
at the end of December we will leave the 4 to pass also us to the 6, then general repass of all macros:finger: and then via recorder:smile:we can also create a special section on the forum where we share the macros of general use, all good or bad we have... I have many nx4 for example

we already have a tread resources http://www.cad3d.it/forum1/showthread.php?t=10568 :smile:

in the meantime I see to find info on the download section

p.s. thanks to bmp

 

[madmax78]

Thanks ip .stasera calmly I try the macro and then I tell you if it works. do you have the rule that prescribes the quotation of gas threads with the letter g or gas?
good idea to collect macros or journals, I also have some

 

[madmax78]

I tried again, and eliminating a line that was empty works. remains to be set for my quota style. now with this creates the style adapted to the macro

 

[IPdesign]

Then do this:
open a file with your settings and you're drafting
create a macro in this way :
macro tools start recording and give a random name

preferential annotation
close the dialog and return to macro and stop .

open with a editor the file so obtained and copy all rows
beg_item etc.... and also
end_item etc...
and replace them to the original macro, then replace the values in these lines
beg_item 170 (1 optm 5125) = 3 ! ansi diameter symbol
beg_item 171 (0 strn 5125) = "m' !
e il relativeo
than_item 170 (1 litm 5125) = 3 ! user solo
than_item 171 (1 size 5125) = "m' !

bye

 

[madmax78]

Okay after that I will also try this change. In the meantime I can tell you that I found which value should take the quotation for the various types of thread. ie if x example filetto 1-11 bspt I have to edit the quota with editor annotations,relations, and select thread size , and not end champfer diameter ,as it is set now. I tried to do journals, but not being practical with vb I can't change everything. I think you can make a button that performs this function. However, it remains to be deleted and only to leave the added one. I can't do that. do you have ideas to suggest?

thank you 1000 , if I exceed this penultimate obstacle I set all drafting

 

[IPdesign]

Can't you create a macro that asks you to select a text to edit and then insert the text you want?
or maybe that's what you ask

 

[lostico]

I do this in nx4 (arm wash):
- start recording the macro
-imposed in the properties of the diameter quota the prefix m instead of ø
-click on the diameter quota
- user input (which must select something)
-system of suffix
- Fine.

in this way any quota you go to do will have as prefix m

Hi.

 

[madmax78]

Can't you create a macro that asks you to select a text to edit and then insert the text you want?
or maybe that's what you ask

It's a possibility. I would also like to understand if it is possible to set that a new command shares a variable rather than another. by default, if not I have seen bad, the diameter of a thread takes the end campfer parameter, while I would like it to take the thread size value. if possible then we solved the way to make any quotation of threads.


ps. but is it possible to delete the text from a quota? I just can't, but at a course I seem to remember that it is possible, so does not go to vary the feature.

 

[madmax78]

I confirm that I found the procedure to ensure that any threaded hole takes the exact share of the thread type (npt,bsp,acme,etc.) remains to be understood if and how to make a button that encloses everything. or at least do in 2 steps. If someone can help me...

 

[IPdesign]

I confirm that I found the procedure to ensure that any threaded hole takes the exact share of the thread type (npt,bsp,acme,etc.) remains to be understood if and how to make a button that encloses everything. or at least do in 2 steps. If someone can help me...

Well, if you found the system, let the others know too, don't you? :biggrin:
the forum is not only a cow to milk, if you have info for other foul you cow at least this time:wink:

step by step what you do manually we will verify the possible solution to make it automatic.

 

[madmax78]

You're right, but we're trying to make a journal, and we're going to try it out and move it through. as soon as ready I will put it available for everyone. or even modified files to get gas holes.
I just wanted to let you know that ugs told me that the fact that I can not automatically quote a threaded hole, and that this enga recognized, is not a problem, but only an improvement that will now be considered. but for us it is a problem.