MBT
Guest
I don't know about rendering, so I make one remark exquisitely aesthetic and absolutely personal.
beautiful, but still too "affiliated"
beautiful, but still too "affiliated"
sephirudex
Guest
x gabb.
definitely improved, especially for the materials of the base of the building, that gray and for the asphalt. Maybe it is the angle of incidence of the sun that distorts a little the tiles illuminating too (it is not said that it is this), but at this point you do not want to cut your veins to do and remake everything.
other neo are gray decorations on the ends of the building, placed at the corners.
for plaster you can not put a little grain?magari tend to excessive and force a little hand, also because usually when the rendering nn are printed are the maximum, I would say 30% different from the magnificence obtained on the pc.
and then sell it for personal taste in the settings.
probably by asking questions in the right way you might be able to get a hand from all
definitely improved, especially for the materials of the base of the building, that gray and for the asphalt. Maybe it is the angle of incidence of the sun that distorts a little the tiles illuminating too (it is not said that it is this), but at this point you do not want to cut your veins to do and remake everything.
other neo are gray decorations on the ends of the building, placed at the corners.
for plaster you can not put a little grain?magari tend to excessive and force a little hand, also because usually when the rendering nn are printed are the maximum, I would say 30% different from the magnificence obtained on the pc.
and then sell it for personal taste in the settings.
probably by asking questions in the right way you might be able to get a hand from all
gabberman
Guest
making 3d tiles was a casino xche 3dstudiomax2008 did not do me the subtraction (boolean operation) x cut them at the ground, so I had to cancel the excess tiles by hand
3ds2008 since often problems when you do the Boolean operations, closes the program and even after using it does not make me + rendering of a section of an apartment. in 3ds2010 this hateful problem of Boolean operations has been solved by case ?? in autocad are always good x that they use solids and not surfaces, cmq the pro-boolean is even worse!Are gray decorations made so that they don't go?? I had to do them in 3d piece x piece and then I set them in the wall making a subtraction.
for the plaster the bump + of so does not come, to me it seems right, I attached a file not compressed
I have already delivered, I don't think I can take it back + since I have anything else to do.
p.s. I would be curious to see your work, maybe in private message.
Attachments
sephirudex
Guest
I use routine autocad2010,revit2010 and 3dsmax2010, currently I do not encounter problems with boolean or probool.
I have no problem with the nurbs and with the nurbs surface, cuttings,blends and everything is regular, besides 3dsmax has implemented some interesting menus, like the ribbon of the graphite, excellent for modeling a block element or something created to the quick.
for now my works are either public abroad, (brighton uk and hove uk) or are for great clients (designer of louis vuitton) and nn I can show them,cmq being a geometra with a little specialization and in phase of studies (architecture) much project of mine, so if you have face, can go on gabriele udella, but only low-q rendering place.
x gray decorations, they look very artificial, handmade with the team,not so.boh,will always be the sun that from a strange effect
gabberman
Guest
gray decorations are made with the team...are painted on the wall, I had to make them crooked? in the photo are = identical.
GP.
Guest
As for the renders I do not open mouth, given the other authoritative interventions I would only make bad figure, while for the modeling I have to congratulate gabberman.
wanting to look for the fur in the egg, since the details have been very careful, I only make a few notes from the "constructive" point of view:
- the tiles should not drain from the gutter (water would not be collected)
- the comignoli are not equipped with lattoneria (faldali)
wanting to look for the fur in the egg, since the details have been very careful, I only make a few notes from the "constructive" point of view:
- the tiles should not drain from the gutter (water would not be collected)
- the comignoli are not equipped with lattoneria (faldali)
sephirudex
Guest
gabberman
Guest
sephirudex
Guest
Hello, thank you for the answer! the job I can't post it,it's a hotel that will be done in my city and have just finished the purchase so it's pretty top secret, but later I let you see it or pass me your facebook.cmq contact I managed more or less, I only had some magna with the scale of the photo.I took a photo of the university of sharjah and I copied some interesting details. now I explain, I opened autocad and I inserted as "referral image raster" a jpeg.After climbing it I took spline and poles and I recalculated it!Sometimes it happens that the lines of the layers are under the photo, in those cases just right click on the photo and bring it back with the option of the same name.
cmq I have not yet understood some fellow forums that claim that for the forums themselves turn builders and entrepreneurs for recruitment?? ? there were, but hahahaha
cmq I have not yet understood some fellow forums that claim that for the forums themselves turn builders and entrepreneurs for recruitment?? ? there were, but hahahaha