reggio
Guest
probably the living edge, connects with suitable radius
Alternatively you could try with chain
andrea1974
Guest
So the ray I tried to do it, but he doesn't see it. stops at the segment like it wasn't a polyline, or closed line. She sees her... You see that only the straight stretch is illuminated? What do you mean by chain? ?
attention that we are in the environment part not together. . .
attention that we are in the environment part not together. . .
Attachments
asblo
Guest
attach the file we try
asblo
Guest
However to the eye if you want it to be repeated along the whole path you have to create a composite curve formed by the various segments, if you read only a segment
andrea1974
Guest
more than this crap doesn't come, change curved rays etc., so much so it's all temporary.
re_solidworks
Guest
turn the sketch into optimized spline and then it works.
andrea1974
Guest
great in fact, just one thing... how do you transform segments into spline?
MassiVonWeizen
Guest
Just select the sketch from the feature manager.. . https://www.google.com/url?sa=t&sou...xa8begqidbab&usg=aovvaw1on9lxgxs2wg9omzxr2tds
andrea1974
Guest
Yes, I had seen this video this morning but I couldn't do it in his way by selecting the sketch of the bag as he does... I can't have tried many times in various ways but with the spline comes immediately. .
MassiVonWeizen
Guest
converting into spline each sketch for curve repetition cannot be the correct solution because a soline is a tangent continuous curve and by its nature difficult to manage. If instead of your sketch you have to manage a trivial closed chain or even the sketch of the video you're sure that you cry and unmadonna after 10 minutes.
the solution is to select the sketch from the function tree and not from the graphic area
the solution is to select the sketch from the function tree and not from the graphic area
andrea1974
Guest
Yes, but the speech is that you don't recognize the sketch of open segments as a curved line to follow for the series...
MassiVonWeizen
Guest
[edit]can be that the open sketch does not select it from the function tree, but the spline is not the solution[edit] we will talk about it when you have to repeat on a path without compromises like the links of a chain or belt
Last edited:
re_solidworks
Guest
for the links of a chain it is better to use the special function.
andrea1974
Guest
you ok chain path you can not use some spline....it's already happened I had to extrude a fixed curve without following a path I wasn't able precisely. .
re_solidworks
Guest
the chain handles with a special function and you can select the separate sketch elements (archies and lines) using selection manager
asblo
Guest
I can't open the file because I have 2019, but it seems to me that the problem is solved as I said more on, using the “composite curve” function with the sketch segments, so there is no need to turn the sketch into a spline
andrea1974
Guest
with composite curve doesn't work.
re_solidworks
Guest
with composite curve the repetition arrives at the end of the first chord.
re_solidworks
Guest
true, it also works so and is a cleaner solution