thread cutter made with coolorange

[graziano-g]

Hi.

I should draw a nut with a slit, build the nut, build the cut solid, apply the boolean subtraction together using the copy functions and sculpt but at operation finished the nut body is dissected while the thread remains whole... .

Any ideas?Hello, thank you

 

[stefanobruno]

see sketch that generates that cut, please.

 

[graziano-g]

Bye.
The sketch is a parallelepipedo.

below the link where you find all the components.
https://www.dropbox.com/sh/nr0usn1wne39yr1/aach0otkznhqzzcbsmvyvtnpa?dl=0Hello, thank you.

 

[Tarkus]

make the cut sketch come to the center...

 

[graziano-g]

Hi.

the thin face of the solid is bound to the floor passing through the center of the nut.

It doesn't work.. .

Did you manage?

Can you posterize the image?

Thank you.

Hi.

 

[graziano-g]

Hi.

solved, the solution is all logical sum.

the thread modeled first with the inventor tool (only graphically) then with threadmodeler ( physically ) is obtained in two stages.

applying the command sculpts in two times, ie first on the solid body then on the generated thread, you get the searched result.
other solutions are welcome, if there are ....

Hi.