tutorial lamiera

[blubossa]

I started studying the sheet metal tutorial, but I can't find the propagating command, where is it?

Thank you.

 

[jeeplova]

I started studying the sheet metal tutorial, but I can't find the propagating command, where is it?

Thank you.

very good, I also found the same problem, in the tutorial in which it makes you draw that particular sheet metal

 

[blubossa]

Who helps us? How can you propagate this flange?

We want someone to enlighten us....:wink:

Thank you.

 

[Mike1967]

It's a subfunction that works visually when you
create "flangy with corner cut":wink:
Try the tutorial to the letter and tell me.

 

[CIARLY]

I started studying the sheet metal tutorial, but I can't find the propagating command, where is it?

Thank you.

It's not a command. It is an icon that appears when you do the sketch on the first edge and if you click on it spreads the piego on the adjacent ones.

 

[blubossa]

Okay, fine.
However I had to delete the flange first and then when I remade it I noticed the propagation icon, but if I decide to propagate at a later time it is no longer possible?

Thank you.

 

[blubossa]

I almost completed the tutorial on the sheet, but I would like to take a hint of how to quote the spreadsheet.

Thank you.

 

[re_solidworks]

I almost completed the tutorial on the sheet, but I would like to take a hint of how to quote the spreadsheet.

Thank you.

I don't understand the problem, you quote it like any other flat shape, with the addition of the necessary quotas to the marking of the fold line.

 

[blubossa]

I don't understand the problem, you quote it like any other flat shape, with the addition of the necessary quotas to the marking of the fold line.

having never made sheets, and having apena made the tutorial I wanted to understand what are the odds and attentions to be kept in mind.
Thank you.

 

[Mike1967]

having never made sheets, and having apena made the tutorial I wanted to understand what are the odds and attentions to be kept in mind.
Thank you.

usually quoting the max size of the virtual rectangle and then
quoted from the edges to the fold lines. (for details ask your bending machine)
less than special situations, holes, shoulders and more
I do not put them, the reading of the development for the operator who will have to bend
It will be easier.

 

[blubossa]

Attached there is a processing image I would like to do on a sheet, but I don't know which command to use. I'm waiting for help.

Thank you.

 

[Mike1967]

Attached there is a processing image I would like to do on a sheet, but I don't know which command to use. I'm waiting for help.

Thank you.

Save. qui, I have already dealt with the subject thoroughly. :finger:

 

[blubossa]

Save. qui, I have already dealt with the subject thoroughly. :finger:

I followed the tutorial, segliendo una formatura tra i found in the project library, la trascino sul lato lamiera che want deforma, ,ma misce il messaggo: si want to create a derivative part?

If I answer, you put the part that I accidentally dragged and I can't help it.

If I answer no, it opens the part as if I have to work on it.

I certainly miss something.... but can't find out? Where am I wrong?

Thank you.

 

[Oldwarper]

I followed the tutorial, segliendo una formatura tra i found in the project library, la trascino sul lato lamiera che want deforma, ,ma misce il messaggo: si want to create a derivative part?

If I answer, you put the part that I accidentally dragged and I can't help it.

If I answer no, it opens the part as if I have to work on it.

I certainly miss something.... but can't find out? Where am I wrong?

Thank you.

the folder must be of forming tools, or click dx on the folder that contains the part (in the top of the project library panel) and check that the check on folder forming tools is enabled. He needs to know that those parts go to "form" on the sheet.

 

[Mike1967]

the folder must be of forming tools, or click dx on the folder that contains the part (in the top of the project library panel) and check that the check is enabled on folder forming tools. He needs to know that those parts go to "form" on the sheet.

...and I add that I had also highlighted in the linked post. . .

boys, let's read well the directions that various users give that
I am the result of hours and hours (migliaia, in my case) to study try and
Check options, even the least frequent.
the use of the forum I find it constructive, but there must also be
of those who use aid to an active and passive collaboration.
The ready parrot... costs.
without controversy... :finger:

the post in question is This is

 

[blubossa]

...and I add that I had also highlighted in the linked post. . .

boys, let's read well the directions that various users give that
I am the result of hours and hours (migliaia, in my case) to study try and
Check options, even the least frequent.
the use of the forum I find it constructive, but there must also be
of those who use aid to an active and passive collaboration.
The ready parrot... costs.
without controversy... :finger:

the post in question is This is

you are perfectly right, but you know how it is when you study something new you cannot, immediately, understand well some concepts that sometimes seem superfluous.

As a study, I was curious about the question of the pot, how can we achieve it?

Thank you.