Unasseen per andni sketch?

[Trotto@81]

I have been using pro engineer wf3 recently, I have been coming from years of autocad, so I have to detoxify, it is not immediate I can assure you, as I assure you that I have used the research and I have found nothing about it.
If in a first sketch I define certain axes of symmetry does not make me use the same axes for a second sketch, forcing me to recreate others on it, is it normal or did I not understand anything?

 

[folle76]

that I know you cannot reuse the symmetry axes of a previous sketch, even if I expect to be promptly denied. however, they are invisible outside the sketch itself and therefore do not weigh the display.
I find myself so well with proes that I'm about to draw only when I put constraints not when I pull lines. I'm a restraint maniac. The only one who doesn't attract me is the double one.

 

[Prof.]

you have corrected what says mad76, only from the wf5 onwards you can create a sketch with a particular axis of half-carry that you also see outside as an axis.
Bye.

 

[Trotto@81]

to see clearly understood the use of a same axis in different sketches, right?

 

[Prof.]

Yes. That's right.

 

[maxopus]

I didn't know that, but I tried and looked for the guide ... I can't use it.
Will it be old age?

 

[Parametric_Ozzy]

the axis can only be used as a unique reference for the geometries of revolution, not to reuse it at a symmetric level.

in the wf5 they introduced the axis and geometric points but I think that trotto always wants to reuse the same reference axis for the symmetric quotation.

This is not feasible, the axis of symmetry must always be recreated.

greetings

 

[maxopus]

the axis can only be used as a unique reference for the geometries of revolution, not to reuse it at a symmetric level.

in the wf5 they introduced the axis and geometric points but I think that trotto always wants to reuse the same reference axis for the symmetric quotation.

This is not feasible, the axis of symmetry must always be recreated.

greetings

Okay... I feel a little less comfortable.

 

[Prof.]

you have corrected what says mad76, only from the wf5 onwards you can create a sketch with a particular axis of half-carry that you also see outside as an axis.
Bye.

I explained perhaps wrongly, in wf5 the axes of half-way geometry can be seen outside as axes and can be taken as a reference in other sketches, on this reference it is then possible to build other axes of half-carry.
Bye.

 

[Parametric_Ozzy]

I explained perhaps wrongly, in wf5 the axes of half-way geometry can be seen outside as axes and can be taken as a reference in other sketches, on this reference it is then possible to build other axes of half-carry.
Bye.

I imagined, I had understood your reasoning well, I only added the clarification not to waste time at that maxopus fennel.

 

[maxopus]

I only added the clarification not to waste time at that maxopus fennel.

from a master like you learn well the application of the "daughter" :biggrin:

 

[Prof.]

from a master like you learn well the application of the "daughter" :biggrin:

So the next time I meet you I have to put on the iron panties!! :tongue::

 

[maxopus]

So the next time I meet you I have to put on the iron panties!! :tongue::

Don't worry, you're a good boy. It's the squirrel that inspires me.

 

[Parametric_Ozzy]

from a master like you learn well the application of the "daughter" :biggrin:

Are you kidding me? I am the prince in this art.hiihhi

So the next time I meet you I have to put on the iron panties!! :tongue::

in spheroidal cast iron. . .

Don't worry, you're a good boy. It's the squirrel that inspires me.

But you didn't inspire the Norwegians?

 

[maxopus]

But you didn't inspire the Norwegians?

I don't remember what you're talking about?

 

[Parametric_Ozzy]

I don't remember what you're talking about?

As soon as he comes, you'll see that you remember...

 

[Trotto@81]

the axis can only be used as a unique reference for the geometries of revolution, not to reuse it at a symmetric level.

in the wf5 they introduced the axis and geometric points but I think that trotto always wants to reuse the same reference axis for the symmetric quotation.

This is not feasible, the axis of symmetry must always be recreated.

greetings

exactly, because in autocad I was used to use the same "axis" for all I needed, for example solids of revolution or extrusions, although in reality in the program of the autodesk the axis is simply a line.

 

[Prof.]

Consider that autocad and pro-e are two very different software.

 

[Trotto@81]

I noticed and always working in autocad is making things difficult, and then the 3d in pro engineer is a mug compared to the mortal jumps I had to do first to realize things slightly elaborate.

 

[Preparation-H]

As soon as he comes, you'll see that you remember...

for "svedese"? :biggrin: