unloading on mirrored sheet

[deep70]

Hello to all boys,
I'm modeling an angle sheet, with corner flanges, I have to realize both the right part and the left part, the sx I will realize it with the control mirrors part, now, when I go to flatten the sheet on the mirrored sx brings me the discharge, while in the original strangely not, you know how to indicate the reason?
place a couple of pictures to make the idea better and if you also need the original row.
as always I thank everyone in advance for your answers and good day to all of you.

original original originalmirrored

 

[MassiVonWeizen]

How is that cut in the original?
how is the sheet not flattened?
the mirrored part you converted it into sheet metal or is it already such at the time of mirroring?
Can you attach a step?

 

[deep70]

Hello Masses,
- the cut in the original does not show the discharge.
- looking at the unflatten plate the discharge seems to me to be there or in that part is made different from how it is then seen in flattened.
- the mirrored part is converted as you see from the image and also presents the flattened discharge as placed in the image above.
I put the step of the detail.
Hello and thank you for the answer.

 

[MassiVonWeizen]

to me the mirror does not appear at all converted into sheet metal.
I see in the feature manager the folder of the sheet parameters, the function of the mirrored body and the folder of the flattening, no conversion function

I'm doing some tests and in modeling it doesn't give me the discharge even using the flange function of the edge (instead of your flange of the corner if I didn't understand your modeling badly) ; but I don't at least convert your step.
continuous with tests

it should be pointed out that I am doing it with 2014 and that in the successive pins the management of the sheets has improved

 

[deep70]

thanks 1000 boulders, very kind, I place you an additional image of the mirrored part, what do you mean with convert function in sheet metal? the part I mirrored it with all the functions of the original, however when I make the flattening in the mirrored part gives me the discharge, while in the original instead not.

mirrored partflattening mirrored part

 

[MassiVonWeizen]

is one of those improvements that were made with the sheets; If I mirror my sheet I find a solid without history, as if it were an imported and I have to convert it into sheet metal. And anyway I find it unloaded.
Unfortunately I cannot help you because with my verse the management limits are clear.

 

[MassiVonWeizen]

I don't know how useful you can be, but I'll have a couple of discussions about it.https://forum.solidworks.com/thread/218671https://forum.solidworks.com/thread/220809

 

[deep70]

Thank you very large, you helped me the same, always helpful and very useful.
Thanks again and good evening to you.