• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

vision 19?

  • Thread starter Thread starter locky_77
  • Start date Start date
I am at the 19 news there are several, if you use 64-bit systems the calculation engine uses 64-bit and core available to generate processing, with considerable time savings.
have added new strategies on advanced 3d machining (grossing and finishing for deep quarries using tools with different protrusions, a constant new z finish more performing in terms of surface quality, a strategy for the processing of fine walls with torque cutters performs the roughing with a higher cutting depth after which finishes the profile to rise with smaller passes).
there are also news at the management level of the cad part now clicking on a corner or a face and using the right button the context menu presents you the most common operations you can accomplish.
if you go to the website http://www.vero.it/downloads.php There is a section with videos and presentations of 19.
 
Hi.. Would you like to know if you own the post processor of selca 40_45 for visi 15? I just started using it. .currently use malening on a 3-axis machine with automatic swivel head to b... if you can send me, my email and marius.cata87@yahoo.it Thank you.
 
Hello, everyone. I used for a long time visi 17 with wire and machining 2d and 3d. Now, cause change work, I passed to version 19 and I must say that I do not see substantial differences from the old version even if I am using it only recently. I should still have the pp for selca v17. If I can find him, I'll let you know. By the way, if I find it, how do I possibly share it? Besides I am looking for the pp for sodick erosion flush version ag. someone can help me? Thank you all!
 
hello to all, I am new to the forum and I still don't know how it works for you I apologize for the mistakes I will make in the various questions or answers. . .
from time I use solidworks and its solidcam, about a 4 years, the company recently adopted the program visi 19 but I don't know how it works, there is a redundancy of icons and commands that are also little intuitive according to me...
My problem is to get my curves and then complete surfaces that are not damaged or deformed in the import. I don't know where the controls are to extract the edges of the surfaces, join them and create the curves to calculate the surface, if the work is done well then joins everything solid, and this I figured out how to do it.
Unfortunately of this software are not found easy manuals or explanations on the net, is there anyone who can give me some advice?
Thank you.
 
thanks mike1967,
Unfortunately at the moment I have problems and would be interested more to understand visi, than in my opinion it is not intuitive compared to sw. I will certainly exploit in the future your availability in sw
Thank you.
 
hi, probably what you are looking for is in "wireframe">" curve and side edges" and adjacent commands, to extract geometry;
then in "solids" there are "rigate" that is tense between two edges, or the "sup. 1 dir. 2 gen" that uses 3 "bords" etc.
However when you are in a command, there is always the help in f1, which if even it is in English, with the images you adore.
Can I ask why they put you on the side of solidworks?
Good job.
 
thank you reborn,
by tapping and following some tutorials here and there I came to these commands, as I repeat I found little intuitive and a little slender.
in the company have a couple of customers who use visi and then they thought well to buy it, then they also use it in workshop as cam.
in the workshop are little practical of surfaces, solids, curves etc., then make the mathematicians "discovered" to me.
sw is a ball with the surfaces, visi seems better as a free environment to do what you need.

Thanks for the help.
 
hi lincad, I asked you why there happened a commission with 3d models of the customer designed with his feet, and to manipulate them to draw the mold they aged 10 years in 7 days.
so that the owner proposed me to start to currency a change of platform. but as this work was all with the surfaces, I think you saved me time in "market surveys".
Say hi.
 
without wanting to inhale someone, perhaps much more experienced than me with sw, I find that the latter is not really suitable for doing complex work with the surfaces. or something you do but it takes a lot of time. I also saw it as little as I know it seems to be much more comfortable with the surfaces and then you can also solidify quickly, it is much more "free" and lets you do enough what you have to do, sw is very parametric and if you do not need to be bound to certain things it starts to become a ball.
However I don't know what you work with the surfaces, of course it is that if you have to go in milling it would be better in the end to get a complete solid not to give possibility to the cam, whatever it is, to have problems.
 
lincad said:
...
However I don't know what you work with the surfaces, of course it is that if you have to go in milling it would be better in the end to get a complete solid not to give possibility to the cam, whatever it is, to have problems.
Click to expand...
This is underintensive. However the cam works a solid even if it is "partially closed" or things like that. the versions that turned on nt were more delicate in this aspect.

I practically have the two cones in plate of connection between the catalyst and the tested on one side and the discharge on the other, for the pot of a motorcycle. They came to me in two different formats, and from here I did not have any problems, but designed with two different logics...almost that while going mounted less than half a meter the one from the other they had drawn two different people, separated from a continent. and there was nothing to "regular", they had not bleed in wrinkles, humps and subsquadra: I'm not telling you how to get the development plan.
as soon as I get to know what model is I go to nighttime dealership with hammer from kilo...:biggrin:
 
Good morning, everyone.

any of you use visi19 for programming sodick erosions?
My problem is this: if I have to make a program to erode two figures with the same height, and the same number of past, but a different offset or supermetal, the postprocessor does not allow me, since it gives me the same offset of the first figure also on the second. Can anyone give me a tip?
 
hi, I don't use v19 or the x em mode, but if you think more or less with in milling, maybe you're working 2 selected figures together, in the same processing, to see them processed together.
but you should also be able to postprocess 2 works created separately in the cam (click mouse + crtl).
in the block, the foundries written one below the other, with the call of the "uterine". at least in milling you can, I hope also in em.
Good work, reborn.
 
hello to all , I use visi 19 since I changed operating system passing from win7 to win 10
I have found a problem has stopped working the wire of the cam, a video error appears to me with written "the chosen import library is not available", yet in the directory of the sistem files of visi there is everything! to someone and already happened and how did you solve it?
thanks to all
 
vince74 said:
hello to all , I use visi 19 since I changed operating system passing from win7 to win 10
I have found a problem has stopped working the wire of the cam, a video error appears to me with written "the chosen import library is not available", yet in the directory of the sistem files of visi there is everything! to someone and already happened and how did you solve it?
thanks to all
Click to expand...
I would ask you not to use the capital: That's screaming, thank you.
 
I am of torino and I can give you a hand I have learned from a few years I have lived 19 in a school rhinomed, all and in the wiframe section, there is a filter called circles and curves try to use it, in the sx pane the function keys then and equal to solid work are described the commands on the same test icon and then tell me if you managed otherwise contact me here marrow74[at]hotmail.it! ciao
 
Last edited by a moderator:
vince74 said:
hello to all , I use visi 19 since I changed operating system passing from win7 to win 10
I have found a problem has stopped working the wire of the cam, a video error appears to me with written "the chosen import library is not available", yet in the directory of the sistem files of visi there is everything! to someone and already happened and how did you solve it?
thanks to all
Click to expand...
hi, from a certain source on w10 was not certified visi21, let alone v19.
to me it happened the other day, again with w7, that the v21 no longer found a library ".dll": the only solution is a new installation, without having erased the old. Incanto this ghost bookcase jumped out of who knows where and the old installation is broken down. It is not the maximum of life, but it attempts so. even if I can tell you that maybe it would have been better to stay on the w7.

if you continue to find obstacles, you can do downgrade, or rollback, from w10 to w7, within 30gg from upgrade, without losing the right to return to w10 within the year.
Good luck, reborn.
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 0 (members: 0, guests: 0)
Back
Top