work directory and lan

[mgdi]

hi to all users of the forum,

This morning I woke up with this problem. (actually it's 15:24, it's a tremendous heat and it could be that my intellectual faculties are very slow!).

Let's talk about creo 2.0 (but with creo 3.0 is the same), until now I had all my files local, today I had the need to move everything on a nas to be able to share them with a new location.
from the browser folders I arrive at my "root network folder" and I can put it in favorites,
from the browser folders I can see the "root network folder" among favorites,
from the "select job directory" button of the multifunction bar I choose favorites but do not see "root network folder" nor do I see network resources to get to the same step by step directory.

suggestions?? ? ? ? ?

thanks in advance

bye

 

[radio]

I don't know I create, but some programs have problems accessing a network folder directly.
try to use the command "connect network units", assigning him a letter as if it were a local disk, maybe it works.

Bye.

 

[mgdi]

I don't know I create, but some programs have problems accessing a network folder directly.
try to use the command "connect network units", assigning him a letter as if it were a local disk, maybe it works.

Bye.

Mitticco!!!! Now it's all about understanding why I create a "road" does everything as it should, for another one you have to resort to the radio solution.

Thank you! ! !

 

[cacciatorino]

Mitticco!!!! Now it's all about understanding why I create a "road" does everything as it should, for another one you have to resort to the radio solution.

Thank you! ! !

But be careful to impose the same letter to all computers on the network, otherwise you might find yourself with some problem.

 

[mgdi]

old problems come back....
I've been accusing myself to my original request for a new problem that has been daring me for 3 days.
I went to creo 3.0 m010, on a pc all ok, on the second there is no way to show him the starting directory (the one indicated in the field "from:" under the property of the link that starts parametric to understand us) that is in lan on network unit with the same letter assigned. Plus if I start on the second pc I can see the directories in lan but I don't see the network if I try to set the work directory!!! !

are already resorted to "extreme" uninstalled methods several times, clean logs etc.etc. if I reinstall the previous realm works as before!!!

ideas? suggestions? similar problems?
thanks in advance

 

[mgdi]

Provisional solution.... after the umpteenth removal of the m010 I first installed the b000 then the m010 and everything works (for now!) as soon as I have time I will try to remove the old version and see what happens.

 

[mgdi]

old problems come back....
I've been accusing myself to my original request for a new problem that has been daring me for 3 days.
I went to creo 3.0 m010, on a pc all ok, on the second there is no way to show him the starting directory (the one indicated in the field "from:" under the property of the link that starts parametric to understand us) that is in lan on network unit with the same letter assigned. Plus if I start on the second pc I can see the directories in lan but I don't see the network if I try to set the work directory!!! !

are already resorted to "extreme" uninstalled methods several times, clean logs etc.etc. if I reinstall the previous version it all works as before!!!

ideas? suggestions? similar problems?
thanks in advance

Provisional solution.... after the umpteenth removal of the m010 I first installed the b000 then the m010 and everything works (for now!) as soon as I have time I will try to remove the old version and see what happens.

same solfa.... same reformed pc and passed to win10, same network unit as assigned (ok in explores resources appears), I create 6-0-1-0 does not see the network drive .... .
Now...I would like to avoid reinstalling an old version to hope that this new configuration will work! ! ! !
ideas? suggestions? similar problems?

 

[320i S]

same solfa.... same reformed pc and passed to win10, same network unit as assigned (ok in explores resources appears), I create 6-0-1-0 does not see the network drive .... .
Now...I would like to avoid reinstalling an old version to hope that this new configuration will work! ! ! !
ideas? suggestions? similar problems?

do this test please, the network address of the disk, instead of taking it from the "preferred" of creo, you take it from a management of windows resources (copy-paste of the address on creo), it works?

 

[mgdi]

I had already taken from explored win resources
the "alternative" addresses only for clarity are:
\\ls-wxl6b1\share\xx\technic\cad\start
z:\technik\cad\start

the first I reach it and I can set it as a work directory and save it in favorites.
what I need with network unit "z", I create does not see it in any way so I can not even save it in favorites.

Thank you.

 

[320i S]

but do you not even see it if you paste it as text/address in the work directory selection creo screen?

 

[mgdi]

Yes, exactly, you don't even see her doing that!!!! ! !

 

[freexf]

Try windows account control settings (uac) at the level indicated in the cursor

 

[320i S]

I think it's a problem of nas access permits.
I would verify that the user has all the privileges as an administrator (or logging as administrator) and see if it works out.

 

[mgdi]

I had already configured permissions as you suggested.
the pc has a single user with administrator permissions (and from win access is always ok on everything)
I create as administrator.
I have enabled them also on public networks and with low cryptography (I don't remember the saying) etc. but nothing. I create does not accept "z:" in any way.

for now I have made a local start/dir to make it work so much we are quite "stable" and I do not have to make changes at the level of config waiting to make the passage to win10 also of my pc and see what happens... .

 

[320i S]

open a ptc call, surely others have had the same problems and maybe have a quick solution.

 

[mgdi]

deleting the option executed as administrator from the properties of the connection on the desktop and not running as administrator .... it all works!

now for scruple I checked my pc with still win7 and it works the opposite of as described now!!!
I'm also sure that at the first start I had done so, it didn't work and so I went to set up administrator permissions.... maybe I missed a reboot in the middle and something didn't work.
I hope it can serve others.
Thanks for the support!