Mike1967
Guest
view/show/removal tangent edges.
this option does not "work" if you have created extrusions without the "unisci" option activated.
this option does not "work" if you have created extrusions without the "unisci" option activated.
sampom
Guest
Why do you sleep?
I have a life of mine and every now and then... I saw that he was in good hands.:biggrin:
for me there is no tangency. .
if you want us to give a controlled mail the file (after having compacted it with winzip, winrar et similara).
greetings
Marco:smile:
p.s. eye I came back:wink::tongue:
sampom
Guest
Mike1967
Guest
even if there was tangency, to eliminate that "saw", you mustdisable by force view the visible edges. . .
I set up some quick keys on the keyboard... for those
functions.
Attachments
valeria_emme
Guest
For me it is so...
Mike1967
Guest
check the quota 40, it is released, in practice I do not find the correspondence
of the hole (replaced quota lines compared to the edge)
if you want to quote holes from the distance from a face, click on a hole edge and then on a face (provided that the latter and perpendicular to the axis) of the solid, you will see that it will quota the hole from the center without need to put provisional axes.
a small note: how did you manage to quote the diameters of the holes
without putting the symbol ø?
Moreover, as a good rule, you quote everything in the sketch before performing extrusions
cuts and what else.
all your sketches are "subdefined" (see guide)
valeria_emme
Guest
as text of the quota I left only <dim> and cancel the rest</dim>
Mike1967
Guest
lol...
ps: eliminates those 2 axes without name, they do not serve anything as they are. :biggrin:
valeria_emme
Guest
:frown ok..
I've also arranged the quota... but for the bribe? I'm leaving like this? Anyway, I don't know if I have to put all the odds on the 3d or just on the table... For now I'm quoting everything, but how do I do that before extrusion? ? ?
sampom
Guest
evidently because as they said "of there", they taught her that in the visible circles, in the plant, the island island It doesn't fit.
:biggrin:
greetings
Marco:smile:
valeria_emme
Guest
Mike1967
Guest
then, to draw with some logic, you have to quote and define the sketch
in phase of sketch, in fact.
define the sketch means not to leave anything unusual, each line will have
its beautiful quota relations and what else.
a defined sketch is recognized by color: black.
If, as I think, you have to make the table of the piece, it is useless to quote it
on the 3d, you lose time for nothing, go on "file/create drawing of the part" and from the bread task drags the view you want to project, once on the table the first view, you can project it, execute sections and quota everything you want.
if to this add the fact that you can import the quotas already present in the 3d (insert/elements of the model), you have little to share.
Mike1967
Guest
I'm just a poor metal builder. . I'm not
learned of tennic design... but I give up... :biggrin:
ps: you would give me the link of the other discussion. . .
valeria_emme
Guest
I didn't know... I created the design of the part, dragged the views, and re-quoted everything manually. .
vabè... tomorrow (I don't know what day it is) I will dedicate myself to tolerances... only on table 2dsampom
Guest
the tangency apparently there is.
apart from that as mike says sketches must be defined, all quoted and related, so that they become black.. rather known a somewhat atypical procedure: you put it all in one sketch and then you did the various extrusions going to select from time to time the affected profile.
it would be better to make a sketch for every form to be extruded; a circle and extrude the pipe, a trapeze with the circular upper edge and extrude the "schiena", a rectangle and extrude the base. .
with your method for more complex details (epposed in assemblies..) risks that you are reported a series of errors and ambiguities of recognition.
opposite to give a correct sequence and uniqueness to the various phases of the "work".
You have to share the sketches.
but did you try to do the tutorials?? and consult the online guide?
These basic procedures are all well explained.
greetings
Marco:smile:
Mike1967
Guest
Marco... The girl's in a hurry. You have to prepare the exam, from what I understand... I'm sure that it will work hard once this commitment is over, for now I think that all energies are dedicated to succeeding in creating qulcosa, the technique is refined over time (I after 9 years have not yet succeeded... heheheh), I also noticed a certain ingarbugliament in the various features, but are errors that are made with the first pieces designed with 3d...
sampom
Guest
Here he is.http://www.cad3d.it/forum1/showthread.php?t=19144But strange, I was convinced you had participated too.
but mine was only a joke, as you will see it has decided that the "rule" is rather "ambigua" (say so), also because the norms are always susceptible to changes in time.
greetings
Marco:smile:
valeria_emme
Guest
But my parents are black... So the "result" is correct??? ? ?
but in this case it seemed the quickest and easiest choice to do everything in one sketch
Mike1967
Guest
the file you posted contains no sketch share, so
All lines are blue, maybe you're referring to the drawing at the table?
valeria_emme
Guest
is the first time I use this program... I go a little bit intuition and try to follow your advice... I don't dare imagine when I go on solidcast
