interpretation

[volaff]

Good morning people.

I should shape this simple component with solidworks.

the idea of departure is to build a cylinder 170 mm long and 60 mm diameter and then go to make the various excavations.

I brought back a sketch of the very "primitive" tree so as not to lose quotas and various diameters.
The problem is that I always find myself a "missing" share.

Am I wrong or am I blind??

thanks to all and good day!

 

[Mike1967]

Good morning people.

I should shape this simple component with solidworks.

the idea of departure is to build a cylinder 170 mm long and 60 mm diameter and then go to make the various excavations.

I brought back a sketch of the very "primitive" tree so as not to lose quotas and various diameters.
The problem is that I always find myself a "missing" share.

Am I wrong or am I blind??

thanks to all and good day!

Forgive me but perhaps your hand does not communicate with your brain (it is a joke ehhh!!) :smile:. .
you have already done half the drawing with the pencil, recreate everything in a sketch in solidworks and use the function revolution. . .
After with a couple of features do what is missing...
ahhh... sti boys.. .

ps: What do you miss (I don't have time to check) ?

Hi.

 

[volaff]

ah ah.
cmq I miss the relative distance (from left to right) between the cylinder cut under axis of 6 mm and the large cylinder of diameter 60.

 

[volaff]

Damn conjunctivitis!

I'll put myself back tomorrow and do the tree sketch. Let's hope well.
Good evening to you all!!

 

[sampom]

I miss the relative distance (from left to right) between the cylinder cut under axis of 6 mm and the large cylinder of diameter 60.

What do you mean? and the 54 treehead what do you think you need?

 

[Mike1967]

What do you mean? and the 54 treehead what do you think you need?

Exactly, the hand sketch is wrong right in the 54th... doing
so he "eat" a quota.

 

[volaff]

excuse me, 54 is not the distance between the beginning of the piece in the axis courier (2) and the beginning of the cylindrical part (1) of diameter 26? ?

 

[Mike1967]

excuse me, 54 is not the distance between the beginning of the piece in the axis courier (2) and the beginning of the cylindrical part (1) of diameter 26? ?

There is no worse deaf than those who do not want to hear... It's not your case.

 

[volaff]

ah ah practically is as if I had shifted that quota of 54 and, consequently, all the others.
I'm just wondering why they brought the line up to 1 and didn't interrupt it before.

Thank you so much!

 

[sampom]

excuse me, 54 is not the distance between the beginning of the piece in the axis courier (2) and the beginning of the cylindrical part (1) of diameter 26? ?

other than conjunctivitis.. This is just blindness:

I'm just wondering why they brought the line up to 1 and didn't interrupt it before.

because if I tried to use the eyes at least once you would notice that they placed a "center tick" on the axis at the center of each "change diameter". therefore it is logical that the extension line departs from those centers (one of which you called 1).

 

[volaff]

the centering notch would be that sort of "cross" at line point. I learned something new.

Thank you! ! !

night to all!

 

[sampom]

the centering notch would be that sort of "cross" at line point. I learned something new.

future engineer!! that "cross species"???? ? !

And fortunately you use solidworks......... .

 

[volaff]

but I wasn't referring to that, but to the fact that I'm gonna call it that!
Night!