because of a sloped plane

[MassiVonWeizen]

then that subaxieme was born from a larger set in which I selected the parts that had to become subaxieme with ctrl and then I made "create subaxieme here"

so the parts were already placed in that way in the original axieme, so your original question

displaying the plans of the set, gives me for example as the right plane this tilted. . .[...]Why are you doing this to me?

has the answer in: because it was placed like this.

.I would like to understand from you how to insert the components so that they do not come home

insert components > select the component > from confirmation
the component will be placed with the origin and the plans corresponding to those of the axieme.
this for the first component that will be the fixed one and that will command the orientation of the assieme, for all others that will be bound between them you can use the drag from the explorer folder or other methods

 

[genesis1975]

only this time it happened to me so... and I still don't understand why.... if the first puts me in place him and the others I do and don't care where he throws them then, how did that tilted plan happen

 

[MassiVonWeizen]

how did that tilted plane happen

you said that the axieme was created by a larger one through the command create subaxisi; if in this larger assembly the parts were positioned inclined compared to the main floor of the larger axieme, you will find them tilted even in the smaller one until tu not the positions as you prefer.

 

[genesis1975]

but this shifts the problem... how did they tilt the plans in the big together?

 

[MassiVonWeizen]

but this shifts the problem... how did they tilt the plans in the big together?

And I know... I've never seen your bigger set. .

 

[genesis1975]

I guess I figured out why.... I'm at the mouth that you told me you were put in first, I didn't lock the rotation.