creation sheet metal slide with curvature in solidworks

[AngeloP88]

Good evening,
I tried in modeling but I still have problems getting a correct profile.
I attach the test file where I used the exact profile of the slide.
I used the sweep function and the path in 3d. for the driving curves I tried to use them but when I go to insert them into the function it no longer gives me the profile or it generates it with excessive deformations.

 

[AngeloP88]

good morning massivonweizen,
Did you see the file I attached yesterday?
Thank you.

 

[AngeloP88]

I managed to create the profile of the slide and divided it into many pieces with the dividing function. Now I should convert the pieces into sheet metal but those in the warp area can't convert them because it tells me that I have no edges or flat faces.
How can I do that?

 

[scalva]

Hi.
It's a good exercise. . .
I'll train you two tests I've done as an example. (made with 2019)
one with the sweep and one where the slide I managed to do it in sheet . the banks no...

I don't think anyone who has to build the slide needs drawings at the tenth of a millimeter but adjusts it to the installation.

 

[AngeloP88]

Hi.
Thank you. I however have the 2015 solidworks version and does not open the files.

 

[scalva]

Uh...
You should have some good soul that has both of you convert it.. .
I can upload a step but you don't see the functions.
I used the propeller

 

[AngeloP88]

I came to this point.
I'll get you the file.
I used the loft function because at the curvature changes the section.
I got stuck because I can't convert the body into sheet metal. He tells me I have no edges or flat faces for conversion.
Can you give me a suggestion? Thank you.

 

[scalva]

You can't convert a pattern like that to sheets.
think about how you would really build it and so you have to model it

 

[AngeloP88]

Okay.
Can you send me your files in step?

 

[scalva]

Here they are.
look that they are not as complete as your..

 

[AngeloP88]

Thank you very much.

 

[AngeloP88]

it would have been useful to have the solidworks file to see the functions. sin

 

[AngeloP88]

the curve is perfect but can you develop as if it were a sheet? Thank you.

 

[scalva]

the curve is because it is a sheet
are the banks the problem.. for me. I can't do it in sheet metal . I have to study it tomorrow but

 

[AngeloP88]

the thickness of the stainless steel sheet they requested is 20/10.
Okay, we'll update tomorrow morning then.
thanks again for support and patience.

 

[MassiVonWeizen]

Sorry I can't help you.
goes beyond my abilities

 

[AngeloP88]

good morning massivonweizen,
Thanks for the help you gave me.

 

[AngeloP88]

Good morning. I managed to get the curved part in sheet using the functions you indicated me yesterday.
as you said yesterday it is complex to create the banks in sheet metal because the surface is not planar.
I'm trying to see some video on the internet.

 

[AngeloP88]

for the banks I am using 3d sketches and then loft sheet.
Could it be okay?
Then I'll get you the file. I try to finish it all.

 

[scalva]

if you find something.. .
I can only do as on image attached for now